2020 Kia Niro Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Kia Niro Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Niro Plug-in Hybrid — Year-Specific Fitment Context
The 2020 Kia Niro Plug-in Hybrid is in year 3 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Kia Niro Plug-in Hybrid are cross-compatible with the 2020 model.
Kia Niro Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Niro Plug-in Hybrid's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Kia Niro Plug-in Hybrid
For the 2020 Kia Niro Plug-in Hybrid, the center bore is 67.1mm—critical for proper wheel centering. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations. Offset must stay within 35-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Flat or ball-seat nuts can loosen, leading to wheel detachment. Verify that aftermarket wheels are load-rated for the vehicle's weight. Cross-compatible with 2018–2024 Niro Plug-in Hybrid models, but double-check specifications.
Historical Fitment Data Reference
In our dataset, Kia Niro Plug-in Hybrid appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations indicate improper centering.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as spokes may contact calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Kia Niro Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2020 Kia Niro Plug-in Hybrid?
The 2020 Kia Niro Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Niro Plug-in Hybrid have the same bolt pattern as the 2020?
The Kia Niro Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the center bore of a 2020 Kia Niro Plug-in Hybrid?
The factory center bore (hub bore) for the 2020 Kia Niro Plug-in Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2020 Kia?
The 2020 Niro Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2020 Kia Niro Plug-in Hybrids use lug bolts or lug nuts?
The 2020 Niro Plug-in Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2020 Kia Niro Plug-in Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Niro Plug-in Hybrid, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset