2024 Kia Niro Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Kia Niro Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Niro Plug-in Hybrid — Year-Specific Fitment Context
The 2024 model year is the final year of the Kia Niro Plug-in Hybrid's 5x114.3 bolt pattern run (since 2018). Wheels from any 2018–2024 Kia Niro Plug-in Hybrid are cross-compatible with the 2024 model.
Kia Niro Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Niro Plug-in Hybrid's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Kia Niro Plug-in Hybrid
For the 2024 Kia Niro Plug-in Hybrid, the center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. The offset range is 35-50mm; deviating outside this may cause rubbing or clearance issues with suspension/brakes. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Using incorrect lug nuts can lead to wheel loosening or damage. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Kia Niro Plug-in Hybrid appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs may result.
- ✅ Check for brake caliper clearance when using aftermarket wheels, especially with offsets near 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Kia Niro Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2024 Kia Niro Plug-in Hybrid?
The 2024 Kia Niro Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Niro Plug-in Hybrid have the same bolt pattern as the 2024?
The Kia Niro Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Kia Niro Plug-in Hybrid use?
The 2024 Kia Niro Plug-in Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 35-50mm offset mean for the 2024 Niro Plug-in Hybrid?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
What is the PCD for a 2024 Kia Niro Plug-in Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Niro Plug-in Hybrid, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2024 Kia?
The 2024 Niro Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset