2016 Kia Sorento Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Kia Sorento, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Sorento — Year-Specific Fitment Context
The 2016 Kia Sorento is in year 6 of 14 using the 5x114.3 pattern (2011–2024). Wheels from any 2011–2024 Kia Sorento are cross-compatible with the 2016 model. Across its full production run (2003–2024), the Sorento has also used: 5x139.7.
Kia Sorento Bolt Pattern by Year
The table below shows how the Sorento's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x139.7 | 95.1 | 46 |
| 2004 | 5x139.7 | 95.1 | 46 |
| 2005 | 5x139.7 | 95.1 | 46 |
| 2006 | 5x139.7 | 95.1 | 46 |
| 2007 | 5x139.7 | 95.1 | 46 |
| 2008 | 5x139.7 | 95.1 | 46 |
| 2009 | 5x139.7 | 95.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| ▸ 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 46 |
| 2020 | 5x114.3 | 67.1 | 46 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Kia Sorento
When selecting aftermarket wheels for your 2016 Kia Sorento, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (73.1mm common), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. For optimal safety, verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility with your specific tire size.
Historical Fitment Data Reference
In our dataset, Kia Sorento appears from 2003 to 2024 (21 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings to prevent vibration.
- ✅ Check that aftermarket wheels clear the brake calipers, especially if upgrading to larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Kia Sorento — Frequently Asked Questions
What is the bolt pattern for a 2016 Kia Sorento?
The 2016 Kia Sorento uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Kia Sorento have the same bolt pattern as the 2016?
The Kia Sorento uses the 5x114.3 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2016 Kia Sorento?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 2016 Sorento?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2016 Kia Sorentos use lug bolts or lug nuts?
The 2016 Sorento requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2016 Kia Sorento?
The factory center bore (hub bore) for the 2016 Kia Sorento is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset