2017 Lincoln MKC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Lincoln MKC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 53 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 MKC — Year-Specific Fitment Context
The 2017 Lincoln MKC is in year 3 of 5 using the 5x108 pattern (2015–2019). Wheels from any 2015–2019 Lincoln MKC are cross-compatible with the 2017 model.
Lincoln MKC Bolt Pattern by Year
The table below shows how the MKC's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2017 Lincoln MKC
When selecting aftermarket wheels for your 2017 Lincoln MKC, the 63.4mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 53mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension components. Always verify lug nut compatibility: the MKC uses 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For a direct fit, wheels from 2015–2019 MKC models are cross-compatible. Prioritize hub-centric fitment and correct lug hardware for safety.
Historical Fitment Data Reference
In our dataset, Lincoln MKC appears from 2015 to 2019 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 103.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings (63.4mm ID to wheel's bore OD) to avoid vibrations.
- ✅ Avoid offset lower than 48mm or higher than 58mm to prevent tire rubbing against struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Lincoln MKC — Frequently Asked Questions
What is the bolt pattern for a 2017 Lincoln MKC?
The 2017 Lincoln MKC uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 53mm.
What other years of Lincoln MKC have the same bolt pattern as the 2017?
The Lincoln MKC uses the 5x108 pattern from 2015 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the PCD for a 2017 Lincoln MKC?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 MKC, the PCD is 5x108.
How tight should I torque the lug nuts on a 2017 Lincoln MKC?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2017 Lincoln MKC use?
The 2017 Lincoln MKC uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2017 Lincoln MKC?
The OEM offset for the 2017 MKC is typically around 53mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset