2008 Lotus Elise Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Lotus Elise, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 30 front, 35 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Elise — Year-Specific Fitment Context
The 2008 Lotus Elise is in year 4 of 7 using the 4x100 pattern (2005–2011). Wheels from any 2005–2011 Lotus Elise are cross-compatible with the 2008 model.
Lotus Elise Bolt Pattern by Year
The table below shows how the Elise's wheel specifications have changed over the years. The 2008 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2008 Lotus Elise
For your 2008 Lotus Elise, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: front wheels must be 30mm offset, rear 35mm, with a tolerance of ±5mm. Deviations can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—conical (60-degree) for most aftermarket wheels, but verify. Avoid ball-seat lug nuts unless specified. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Lotus Elise appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving to account for wheel seating.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 56.6mm center bore.
- ✅ Check inner clearance for front offset: 30mm offset with 7-inch wide wheels is common; wider wheels may require lower offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Lotus Elise — Frequently Asked Questions
What is the bolt pattern for a 2008 Lotus Elise?
The 2008 Lotus Elise uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 30 front, 35 rearmm.
What other years of Lotus Elise have the same bolt pattern as the 2008?
The Lotus Elise uses the 4x100 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the center bore of a 2008 Lotus Elise?
The factory center bore (hub bore) for the 2008 Lotus Elise is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2008 Lotus Elise?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Elise, the PCD is 4x100.
Can I put aftermarket wheels on my 2008 Lotus Elise?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 30 front, 35 rearmm, and a center bore of at least 56.6mm (using hub rings if larger).
Do 2008 Lotus Elises use lug bolts or lug nuts?
The 2008 Elise requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset