2011 Lotus Elise Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Lotus Elise, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 30 front, 35 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Elise — Year-Specific Fitment Context
The 2011 model year is the final year of the Lotus Elise's 4x100 bolt pattern run (since 2005). Wheels from any 2005–2011 Lotus Elise are cross-compatible with the 2011 model.
Lotus Elise Bolt Pattern by Year
The table below shows how the Elise's wheel specifications have changed over the years. The 2011 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2011 Lotus Elise
For your 2011 Lotus Elise, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: front 30mm, rear 35mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a ball seat; aftermarket wheels may require conical or ball seat lugs. Never mix seat types. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly torqued.
Historical Fitment Data Reference
In our dataset, Lotus Elise appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 Nm after 50-100 miles, then periodically.
- ✅ Verify wheel bore is 56.6mm or use hub-centric rings; plastic rings can degrade over time.
- ✅ Check inner clearance with aftermarket wheels; the Elise's suspension and brake calipers are tight.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Lotus Elise — Frequently Asked Questions
What is the bolt pattern for a 2011 Lotus Elise?
The 2011 Lotus Elise uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 30 front, 35 rearmm.
What other years of Lotus Elise have the same bolt pattern as the 2011?
The Lotus Elise uses the 4x100 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Lotus Elise?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Elise, the PCD is 4x100.
What lug nut size does the 2011 Lotus Elise use?
The 2011 Lotus Elise uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2011 Lotus Elise?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 2011 Lotus Elise?
The OEM offset for the 2011 Elise is typically around 30 front, 35 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset