2026 MAZDA CX-70 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 MAZDA CX-70 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).
2026 MAZDA CX-70 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80-87 ft-lbs (108-118 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 CX-70 — Year-Specific Fitment Context
The 2026 model year is the final year of the MAZDA CX-70's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 MAZDA CX-70 are cross-compatible with the 2026 model.
MAZDA CX-70 Bolt Pattern by Year
Looking for all generations? View the complete MAZDA CX-70 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the CX-70's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 MAZDA CX-70 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 MAZDA CX-70, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Ferrari 296 GTB | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2015 Ferrari 458 Italia | 67.1 mm (Exact) | 45 front, 58 rear | N 14x1.50 (Ball) |
| 2015 Ferrari 458 Speciale | 67.1 mm (Exact) | 45 front, 48 rear | N 14x1.50 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 2003 Dodge Caravan Cargo | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 1998 Dodge Caravan Passenger | 71.6 mm | 71.6mm → 67.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80-87 ft-lbs (108-118 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 MAZDA CX-70 — Frequently Asked Questions
What is the bolt pattern for a 2026 MAZDA CX-70?
The 2026 MAZDA CX-70 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of MAZDA CX-70 have the same bolt pattern as the 2026?
The MAZDA CX-70 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 MAZDA CX-70?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 CX-70, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2026 MAZDA CX-70?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2026 MAZDA CX-70 use?
The 2026 MAZDA CX-70 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another MAZDA fit my 2026 CX-70?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →