2011 MAZDA CX-9 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 MAZDA CX-9, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 CX-9 — Year-Specific Fitment Context
The 2011 MAZDA CX-9 is in year 5 of 17 using the 5x114.3 pattern (2007–2023). Wheels from any 2007–2023 MAZDA CX-9 are cross-compatible with the 2011 model.
MAZDA CX-9 Bolt Pattern by Year
The table below shows how the CX-9's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| ▸ 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 MAZDA CX-9
When selecting wheels for your 2011 MAZDA CX-9, the 5x114.3 bolt pattern is shared across 2007–2023 models, ensuring cross-compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset sensitivity is high; the factory 50mm offset maintains optimal suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (60-degree conical or ball seat, depending on the wheel). Improper lug nuts can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, MAZDA CX-9 appears from 2007 to 2023 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 67.1mm center bore.
- ✅ Avoid offsets below 45mm on the front to prevent tire rubbing against the fender liner.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 MAZDA CX-9 — Frequently Asked Questions
What is the bolt pattern for a 2011 MAZDA CX-9?
The 2011 MAZDA CX-9 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA CX-9 have the same bolt pattern as the 2011?
The MAZDA CX-9 uses the 5x114.3 pattern from 2007 through 2023. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the center bore of a 2011 MAZDA CX-9?
The factory center bore (hub bore) for the 2011 MAZDA CX-9 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2011 MAZDA CX-9?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 CX-9, the PCD is 5x114.3.
What lug nut size does the 2011 MAZDA CX-9 use?
The 2011 MAZDA CX-9 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2011 MAZDA CX-9s use lug bolts or lug nuts?
The 2011 CX-9 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset