2010 MAZDA CX-9 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 MAZDA CX-9, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 CX-9 — Year-Specific Fitment Context
The 2010 MAZDA CX-9 is in year 4 of 17 using the 5x114.3 pattern (2007–2023). Wheels from any 2007–2023 MAZDA CX-9 are cross-compatible with the 2010 model.
MAZDA CX-9 Bolt Pattern by Year
The table below shows how the CX-9's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| ▸ 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 MAZDA CX-9
When selecting wheels for your 2010 MAZDA CX-9, the bolt pattern is 5x114.3, but critical details include a 67.1mm center bore and 50mm offset. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: staying near 50mm maintains proper suspension geometry and clearance. Using wheels with incorrect offset can cause rubbing or bearing wear. Safety warning: always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Never use ball-seat lug nuts on conical-seat wheels, as this can lead to loosening and wheel loss.
Historical Fitment Data Reference
In our dataset, MAZDA CX-9 appears from 2007 to 2023 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Verify that aftermarket wheels have a center bore of at least 67.1mm; use hub-centric rings if larger.
- ✅ Check for brake caliper clearance, especially with 20-inch wheels or low-offset designs, as the CX-9 has large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 MAZDA CX-9 — Frequently Asked Questions
What is the bolt pattern for a 2010 MAZDA CX-9?
The 2010 MAZDA CX-9 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA CX-9 have the same bolt pattern as the 2010?
The MAZDA CX-9 uses the 5x114.3 pattern from 2007 through 2023. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the center bore of a 2010 MAZDA CX-9?
The factory center bore (hub bore) for the 2010 MAZDA CX-9 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another MAZDA fit my 2010 CX-9?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Why is matching the 67.1mm center bore important for the 2010 CX-9?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2010 MAZDA CX-9?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset