2012 MAZDA CX-9 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 MAZDA CX-9, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 CX-9 — Year-Specific Fitment Context
The 2012 MAZDA CX-9 is in year 6 of 17 using the 5x114.3 pattern (2007–2023). Wheels from any 2007–2023 MAZDA CX-9 are cross-compatible with the 2012 model.
MAZDA CX-9 Bolt Pattern by Year
The table below shows how the CX-9's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| ▸ 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 MAZDA CX-9
The 2012 MAZDA CX-9 uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore, preventing vibrations and ensuring proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut compatibility: the thread pitch is M12x1.5, and the seat type must be conical (60-degree taper) or ball seat as per OEM. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, MAZDA CX-9 appears from 2007 to 2023 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; otherwise, vibrations may occur.
- ✅ Check for brake caliper clearance when changing offset; a lower offset (e.g., 45mm) may require spacers or caliper grinding.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 MAZDA CX-9 — Frequently Asked Questions
What is the bolt pattern for a 2012 MAZDA CX-9?
The 2012 MAZDA CX-9 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA CX-9 have the same bolt pattern as the 2012?
The MAZDA CX-9 uses the 5x114.3 pattern from 2007 through 2023. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Can I use spacers on my 2012 MAZDA CX-9?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What lug nut size does the 2012 MAZDA CX-9 use?
The 2012 MAZDA CX-9 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2012 MAZDA CX-9?
The factory center bore (hub bore) for the 2012 MAZDA CX-9 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 50mm offset mean for the 2012 CX-9?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset