2001 MAZDA MPV Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 MAZDA MPV, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 50
Torque Specs 80 ft-lbs (108 Nm)

2001 MPV — Year-Specific Fitment Context

The 2001 MAZDA MPV is in year 10 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 MAZDA MPV are cross-compatible with the 2001 model.

MAZDA MPV Bolt Pattern by Year

The table below shows how the MPV's wheel specifications have changed over the years. The 2001 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x114.3 67.1 45-50
1993 5x114.3 67.1 45-50
1994 5x114.3 67.1 45-50
1995 5x114.3 67.1 45-50
1996 5x114.3 67.1 45-50
1997 5x114.3 67.1 45-50
1998 5x114.3 67.1 50
2000 5x114.3 67.1 50
▸ 2001 5x114.3 67.1 50
2002 5x114.3 67.1 50
2003 5x114.3 67.1 50
2004 5x114.3 67.1 50
2005 5x114.3 67.1 50
2006 5x114.3 67.1 50

Fitment Notes

The 2001 MAZDA MPV has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, MAZDA MPV appears from 1992 to 2006 (14 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2001 MAZDA MPV — Frequently Asked Questions

What is the bolt pattern for a 2001 MAZDA MPV?

The 2001 MAZDA MPV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.

What other years of MAZDA MPV have the same bolt pattern as the 2001?

The MAZDA MPV uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.

What does 50mm offset mean for the 2001 MPV?

An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.

Can I use spacers on my 2001 MAZDA MPV?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.

What lug nut size does the 2001 MAZDA MPV use?

The 2001 MAZDA MPV uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the factory wheel offset for a 2001 MAZDA MPV?

The OEM offset for the 2001 MPV is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

MAZDA MPV is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2001 MAZDA MPV, please report it via our About page contact so we can verify and update this record.

MAZDA MPV By Year

1992 1993 1994 1995 1996 1997 1998 2000 2001 2002 2003 2004 2005 2006

Other MAZDA Models

323 B-Series Cab Plus CX-3 CX-30 CX-50 CX-90 CX-90 PHEV MAZDA2 MAZDA5 MX-3 MX-30 MX-5 Miata MX-5 Miata RF MX-6 Millenia Navajo Protege5 RX-7 RX-8 Tribute