1994 MAZDA MPV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 MAZDA MPV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 MPV — Year-Specific Fitment Context
The 1994 MAZDA MPV is in year 3 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 MAZDA MPV are cross-compatible with the 1994 model.
MAZDA MPV Bolt Pattern by Year
The table below shows how the MPV's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 5x114.3 | 67.1 | 45-50 |
| 1998 | 5x114.3 | 67.1 | 50 |
| 2000 | 5x114.3 | 67.1 | 50 |
| 2001 | 5x114.3 | 67.1 | 50 |
| 2002 | 5x114.3 | 67.1 | 50 |
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 MAZDA MPV
For your 1994 Mazda MPV, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 45-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical or ball seat as per wheel manufacturer). Improper lug nuts can lead to wheel detachment. Verify that the wheel's load rating meets or exceeds the vehicle's requirements.
Historical Fitment Data Reference
In our dataset, MAZDA MPV appears from 1992 to 2006 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check brake caliper clearance when using wheels with lower offset (45mm) to prevent contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 MAZDA MPV — Frequently Asked Questions
What is the bolt pattern for a 1994 MAZDA MPV?
The 1994 MAZDA MPV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MPV have the same bolt pattern as the 1994?
The MAZDA MPV uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1994 MAZDA?
The 1994 MPV uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 1994 MAZDA MPV?
The factory center bore (hub bore) for the 1994 MAZDA MPV is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 1994 MAZDA MPV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 MPV, the PCD is 5x114.3.
What is the factory wheel offset for a 1994 MAZDA MPV?
The OEM offset for the 1994 MPV is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset