1995 MAZDA MPV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 MAZDA MPV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1995 MPV — Year-Specific Fitment Context
The 1995 MAZDA MPV is in year 4 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 MAZDA MPV are cross-compatible with the 1995 model.
MAZDA MPV Bolt Pattern by Year
The table below shows how the MPV's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 5x114.3 | 67.1 | 45-50 |
| 1998 | 5x114.3 | 67.1 | 50 |
| 2000 | 5x114.3 | 67.1 | 50 |
| 2001 | 5x114.3 | 67.1 | 50 |
| 2002 | 5x114.3 | 67.1 | 50 |
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1995 MAZDA MPV
For your 1995 Mazda MPV, the 5x114.3 bolt pattern is shared across 1992–2006 models, ensuring direct fitment from those years. Critical: the center bore is 67.1mm—aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 45–50mm; deviating risks rubbing suspension or fenders. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical 60-degree for most aftermarket wheels; OEM uses ball seat). Never mix seat types—this can cause wheel loosening. Torque to 80–90 ft-lbs in a star pattern.
Historical Fitment Data Reference
In our dataset, MAZDA MPV appears from 1992 to 2006 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for settling.
- ✅ Avoid spacers unless hub-centric; they alter offset and may require longer studs.
- ✅ Verify wheel weight capacity—MPV is heavy; cheap wheels may fail under load.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 MAZDA MPV — Frequently Asked Questions
What is the bolt pattern for a 1995 MAZDA MPV?
The 1995 MAZDA MPV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MPV have the same bolt pattern as the 1995?
The MAZDA MPV uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1995 MAZDA?
The 1995 MPV uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45-50mm offset mean for the 1995 MPV?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
What is the center bore of a 1995 MAZDA MPV?
The factory center bore (hub bore) for the 1995 MAZDA MPV is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another MAZDA fit my 1995 MPV?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset