2008 MAZDA MX-5 Miata Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 MAZDA MX-5 Miata, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 MX-5 Miata — Year-Specific Fitment Context
The 2008 MAZDA MX-5 Miata is in year 2 of 10 using the 5x114.3 pattern (2007–2016). Wheels from any 2007–2016 MAZDA MX-5 Miata are cross-compatible with the 2008 model. Across its full production run (1992–2024), the MX-5 Miata has also used: 4x100.
MAZDA MX-5 Miata Bolt Pattern by Year
The table below shows how the MX-5 Miata's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 54.1 | 45 |
| 1993 | 4x100 | 54.1 | 45 |
| 1994 | 4x100 | 54.1 | 45 |
| 1995 | 4x100 | 54.1 | 45 |
| 1996 | 4x100 | 54.1 | 45 |
| 1997 | 4x100 | 54.1 | 45 |
| 1999 | 4x100 | 54.1 | 45 |
| 2000 | 4x100 | 54.1 | 45 |
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 45 |
| 2007 | 5x114.3 | 67.1 | 50 |
| ▸ 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 4x100 | 54.1 | 45 |
| 2018 | 4x100 | 54.1 | 45 |
| 2019 | 4x100 | 54.1 | 45 |
| 2020 | 4x100 | 54.1 | 45 |
| 2021 | 4x100 | 54.1 | 45 |
| 2022 | 4x100 | 54.1 | 45 |
| 2024 | 4x100 | 54.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 MAZDA MX-5 Miata
For your 2008 MX-5 Miata, the 67.1mm center bore is critical; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration. The 50mm offset is sensitive—deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct 12x1.50 lug nuts with a conical (60-degree) seat; ball-seat nuts are unsafe. Re-torque after 50-100 miles. Wheels from 2007-2016 MX-5s are direct fit, but avoid 4x100 patterns from earlier models.
Historical Fitment Data Reference
In our dataset, MAZDA MX-5 Miata appears from 1992 to 2024 (31 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel offset stays within 45-55mm to avoid fender or suspension contact.
- ✅ Use hub-centric rings if aftermarket wheel bore exceeds 67.1mm to prevent vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 MAZDA MX-5 Miata — Frequently Asked Questions
What is the bolt pattern for a 2008 MAZDA MX-5 Miata?
The 2008 MAZDA MX-5 Miata uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MX-5 Miata have the same bolt pattern as the 2008?
The MAZDA MX-5 Miata uses the 5x114.3 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the center bore of a 2008 MAZDA MX-5 Miata?
The factory center bore (hub bore) for the 2008 MAZDA MX-5 Miata is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 MAZDA?
The 2008 MX-5 Miata uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2008 MAZDA MX-5 Miata use?
The 2008 MAZDA MX-5 Miata uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 67.1mm center bore important for the 2008 MX-5 Miata?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset