2016 MAZDA MX-5 Miata Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 MAZDA MX-5 Miata, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 MX-5 Miata — Year-Specific Fitment Context
The 2016 model year is the final year of the MAZDA MX-5 Miata's 5x114.3 bolt pattern run (since 2007). Wheels from any 2007–2016 MAZDA MX-5 Miata are cross-compatible with the 2016 model. Important: starting in 2017, MAZDA switched to 4x100 — those wheels will not fit the 2016 model. Across its full production run (1992–2024), the MX-5 Miata has also used: 4x100.
MAZDA MX-5 Miata Bolt Pattern by Year
The table below shows how the MX-5 Miata's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 54.1 | 45 |
| 1993 | 4x100 | 54.1 | 45 |
| 1994 | 4x100 | 54.1 | 45 |
| 1995 | 4x100 | 54.1 | 45 |
| 1996 | 4x100 | 54.1 | 45 |
| 1997 | 4x100 | 54.1 | 45 |
| 1999 | 4x100 | 54.1 | 45 |
| 2000 | 4x100 | 54.1 | 45 |
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 45 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| ▸ 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 4x100 | 54.1 | 45 |
| 2018 | 4x100 | 54.1 | 45 |
| 2019 | 4x100 | 54.1 | 45 |
| 2020 | 4x100 | 54.1 | 45 |
| 2021 | 4x100 | 54.1 | 45 |
| 2022 | 4x100 | 54.1 | 45 |
| 2024 | 4x100 | 54.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 MAZDA MX-5 Miata
For the 2016 Mazda MX-5 Miata, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Lug nuts are M12x1.5 with a conical 60-degree seat—never use ball-seat or incorrect thread pitch. This is the final year of the 5x114.3 pattern; 2017+ models use 4x100 and are incompatible. Always test fit before purchase.
Historical Fitment Data Reference
In our dataset, MAZDA MX-5 Miata appears from 1992 to 2024 (31 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 67.1mm; they will not fit without machining.
- ✅ Check inner clearance for brake calipers, especially with low-offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 MAZDA MX-5 Miata — Frequently Asked Questions
What is the bolt pattern for a 2016 MAZDA MX-5 Miata?
The 2016 MAZDA MX-5 Miata uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MX-5 Miata have the same bolt pattern as the 2016?
The MAZDA MX-5 Miata uses the 5x114.3 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Will 2017 MAZDA MX-5 Miata wheels fit a 2016 model?
No. The 2017 MAZDA MX-5 Miata switched to a 4x100 bolt pattern, which is not compatible with the 2016 model's 5x114.3. Using mismatched patterns is unsafe.
What does 50mm offset mean for the 2016 MX-5 Miata?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Do 2016 MAZDA MX-5 Miatas use lug bolts or lug nuts?
The 2016 MX-5 Miata requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2016 MAZDA MX-5 Miata use?
The 2016 MAZDA MX-5 Miata uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset