2013 MAZDA MX-5 Miata Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 MAZDA MX-5 Miata, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 MX-5 Miata — Year-Specific Fitment Context
The 2013 MAZDA MX-5 Miata is in year 7 of 10 using the 5x114.3 pattern (2007–2016). Wheels from any 2007–2016 MAZDA MX-5 Miata are cross-compatible with the 2013 model. Across its full production run (1992–2024), the MX-5 Miata has also used: 4x100.
MAZDA MX-5 Miata Bolt Pattern by Year
The table below shows how the MX-5 Miata's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 54.1 | 45 |
| 1993 | 4x100 | 54.1 | 45 |
| 1994 | 4x100 | 54.1 | 45 |
| 1995 | 4x100 | 54.1 | 45 |
| 1996 | 4x100 | 54.1 | 45 |
| 1997 | 4x100 | 54.1 | 45 |
| 1999 | 4x100 | 54.1 | 45 |
| 2000 | 4x100 | 54.1 | 45 |
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 45 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| ▸ 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 4x100 | 54.1 | 45 |
| 2018 | 4x100 | 54.1 | 45 |
| 2019 | 4x100 | 54.1 | 45 |
| 2020 | 4x100 | 54.1 | 45 |
| 2021 | 4x100 | 54.1 | 45 |
| 2022 | 4x100 | 54.1 | 45 |
| 2024 | 4x100 | 54.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 MAZDA MX-5 Miata
For your 2013 Mazda MX-5 Miata, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive: the factory 50mm offset maintains optimal geometry. Deviating more than ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.50 thread pitch with a 60-degree conical seat. Ball-seat or flat-seat nuts can damage wheels or loosen. Re-torque after 50-100 miles to ensure safety.
Historical Fitment Data Reference
In our dataset, MAZDA MX-5 Miata appears from 1992 to 2024 (31 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid spacers without extended studs; they can cause insufficient thread engagement.
- ✅ Check inner clearance for brake calipers and suspension when using wider wheels or lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 MAZDA MX-5 Miata — Frequently Asked Questions
What is the bolt pattern for a 2013 MAZDA MX-5 Miata?
The 2013 MAZDA MX-5 Miata uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MX-5 Miata have the same bolt pattern as the 2013?
The MAZDA MX-5 Miata uses the 5x114.3 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 MAZDA MX-5 Miatas use lug bolts or lug nuts?
The 2013 MX-5 Miata requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2013 MAZDA MX-5 Miata?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 MX-5 Miata, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2013 MAZDA MX-5 Miata?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2013 MAZDA MX-5 Miata?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset