2000 Mercedes-Benz C-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Mercedes-Benz C-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 37 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 C-Class — Year-Specific Fitment Context
The 2000 Mercedes-Benz C-Class is in year 7 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz C-Class are cross-compatible with the 2000 model.
Mercedes-Benz C-Class Bolt Pattern by Year
The table below shows how the C-Class's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 37 |
| 1995 | 5x112 | 66.6 | 37 |
| 1996 | 5x112 | 66.6 | 37 |
| 1997 | 5x112 | 66.6 | 37 |
| 1998 | 5x112 | 66.6 | 37 |
| 1999 | 5x112 | 66.6 | 37 |
| ▸ 2000 | 5x112 | 66.6 | 37 |
| 2001 | 5x112 | 66.6 | 37 |
| 2002 | 5x112 | 66.6 | 37 |
| 2003 | 5x112 | 66.6 | 37 |
| 2004 | 5x112 | 66.6 | 37 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.5 | 46 |
| 2010 | 5x112 | 66.5 | 46 |
| 2011 | 5x112 | 66.5 | 46 |
| 2012 | 5x112 | 66.5 | 48 |
| 2013 | 5x112 | 66.5 | 48 |
| 2014 | 5x112 | 66.5 | 48 |
| 2015 | 5x112 | 66.5 | 48 |
| 2016 | 5x112 | 66.5 | 48 |
| 2017 | 5x112 | 66.5 | 48 |
| 2018 | 5x112 | 66.5 | 48 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2000 Mercedes-Benz C-Class
For your 2000 Mercedes-Benz C-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 37mm, but 35-42mm is acceptable. Going too low (e.g., 20mm) stresses bearings; too high (e.g., 50mm) may rub suspension. Always match lug nut thread pitch: 12x1.50. Mercedes uses ball seats; aftermarket wheels may require conical or ball-seat lugs. Never mix seat types—improper seating causes wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz C-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 98.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm after 50-100 miles of driving.
- ✅ Avoid using universal lug nuts; ensure correct ball seat for OEM wheels or conical for aftermarket.
- ✅ Check inner clearance: 17x7.5 ET37 is safe; wider wheels (8.5") may need lower offset (ET30) to clear struts.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Mercedes-Benz C-Class — Frequently Asked Questions
What is the bolt pattern for a 2000 Mercedes-Benz C-Class?
The 2000 Mercedes-Benz C-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 37mm.
What other years of Mercedes-Benz C-Class have the same bolt pattern as the 2000?
The Mercedes-Benz C-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the factory wheel offset for a 2000 Mercedes-Benz C-Class?
The OEM offset for the 2000 C-Class is typically around 37mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 37mm offset mean for the 2000 C-Class?
An offset of 37mm means the wheel's mounting surface is 37mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the center bore of a 2000 Mercedes-Benz C-Class?
The factory center bore (hub bore) for the 2000 Mercedes-Benz C-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2000 Mercedes-Benz C-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset