2013 Mercedes-Benz C-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Mercedes-Benz C-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 48 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 C-Class — Year-Specific Fitment Context
The 2013 Mercedes-Benz C-Class is in year 20 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz C-Class are cross-compatible with the 2013 model.
Mercedes-Benz C-Class Bolt Pattern by Year
The table below shows how the C-Class's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 37 |
| 1995 | 5x112 | 66.6 | 37 |
| 1996 | 5x112 | 66.6 | 37 |
| 1997 | 5x112 | 66.6 | 37 |
| 1998 | 5x112 | 66.6 | 37 |
| 1999 | 5x112 | 66.6 | 37 |
| 2000 | 5x112 | 66.6 | 37 |
| 2001 | 5x112 | 66.6 | 37 |
| 2002 | 5x112 | 66.6 | 37 |
| 2003 | 5x112 | 66.6 | 37 |
| 2004 | 5x112 | 66.6 | 37 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.5 | 46 |
| 2010 | 5x112 | 66.5 | 46 |
| 2011 | 5x112 | 66.5 | 46 |
| 2012 | 5x112 | 66.5 | 48 |
| ▸ 2013 | 5x112 | 66.5 | 48 |
| 2014 | 5x112 | 66.5 | 48 |
| 2015 | 5x112 | 66.5 | 48 |
| 2016 | 5x112 | 66.5 | 48 |
| 2017 | 5x112 | 66.5 | 48 |
| 2018 | 5x112 | 66.5 | 48 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2013 Mercedes-Benz C-Class
For your 2013 Mercedes-Benz C-Class, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; stock is 48mm, but a range of 35-55mm is acceptable depending on width. Always verify lug nut compatibility: use 14x1.50 thread pitch with ball seat (Mercedes-specific) or conical seat if specified. Incorrect lug nuts can cause wheel separation. For safety, re-torque after 50-100 miles and avoid spacers without extended studs.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz C-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 98.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50-100 miles of driving.
- ✅ Avoid using aftermarket wheels without hub-centric rings; vibrations indicate improper centering.
- ✅ Check that aftermarket wheels have sufficient clearance for the C-Class's large brake calipers (especially AMG models).
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Mercedes-Benz C-Class — Frequently Asked Questions
What is the bolt pattern for a 2013 Mercedes-Benz C-Class?
The 2013 Mercedes-Benz C-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 48mm.
What other years of Mercedes-Benz C-Class have the same bolt pattern as the 2013?
The Mercedes-Benz C-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the factory wheel offset for a 2013 Mercedes-Benz C-Class?
The OEM offset for the 2013 C-Class is typically around 48mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Mercedes-Benz fit my 2013 C-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
What is the PCD for a 2013 Mercedes-Benz C-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 C-Class, the PCD is 5x112.
How do I measure the bolt pattern on my 2013 Mercedes-Benz?
The 2013 C-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset