2010 Mercedes-Benz C-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Mercedes-Benz C-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 46 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 C-Class — Year-Specific Fitment Context
The 2010 Mercedes-Benz C-Class is in year 17 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz C-Class are cross-compatible with the 2010 model.
Mercedes-Benz C-Class Bolt Pattern by Year
The table below shows how the C-Class's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 37 |
| 1995 | 5x112 | 66.6 | 37 |
| 1996 | 5x112 | 66.6 | 37 |
| 1997 | 5x112 | 66.6 | 37 |
| 1998 | 5x112 | 66.6 | 37 |
| 1999 | 5x112 | 66.6 | 37 |
| 2000 | 5x112 | 66.6 | 37 |
| 2001 | 5x112 | 66.6 | 37 |
| 2002 | 5x112 | 66.6 | 37 |
| 2003 | 5x112 | 66.6 | 37 |
| 2004 | 5x112 | 66.6 | 37 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.5 | 46 |
| ▸ 2010 | 5x112 | 66.5 | 46 |
| 2011 | 5x112 | 66.5 | 46 |
| 2012 | 5x112 | 66.5 | 48 |
| 2013 | 5x112 | 66.5 | 48 |
| 2014 | 5x112 | 66.5 | 48 |
| 2015 | 5x112 | 66.5 | 48 |
| 2016 | 5x112 | 66.5 | 48 |
| 2017 | 5x112 | 66.5 | 48 |
| 2018 | 5x112 | 66.5 | 48 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2010 Mercedes-Benz C-Class
When selecting wheels for your 2010 Mercedes-Benz C-Class, the 66.5mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the C-Class uses 14x1.50 thread pitch with ball-seat lug nuts. Using incorrect thread pitch or seat type (e.g., conical) can lead to wheel loosening or damage. For safety, insist on hub-centric rings and correct lug hardware.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz C-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 98.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal lug nuts; they may not seat properly with Mercedes ball-seat wheels.
- ✅ Check inner clearance for aftermarket wheels; the C-Class has tight tolerances near the strut and brake caliper.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Mercedes-Benz C-Class — Frequently Asked Questions
What is the bolt pattern for a 2010 Mercedes-Benz C-Class?
The 2010 Mercedes-Benz C-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 46mm.
What other years of Mercedes-Benz C-Class have the same bolt pattern as the 2010?
The Mercedes-Benz C-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Mercedes-Benz C-Class?
The OEM offset for the 2010 C-Class is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2010 Mercedes-Benz C-Classs use lug bolts or lug nuts?
The 2010 C-Class requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2010 Mercedes-Benz?
The 2010 C-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2010 Mercedes-Benz C-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 46mm, and a center bore of at least 66.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset