2003 Mercedes-Benz C-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Mercedes-Benz C-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 37 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2003 C-Class — Year-Specific Fitment Context
The 2003 Mercedes-Benz C-Class is in year 10 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz C-Class are cross-compatible with the 2003 model.
Mercedes-Benz C-Class Bolt Pattern by Year
The table below shows how the C-Class's wheel specifications have changed over the years. The 2003 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 37 |
| 1995 | 5x112 | 66.6 | 37 |
| 1996 | 5x112 | 66.6 | 37 |
| 1997 | 5x112 | 66.6 | 37 |
| 1998 | 5x112 | 66.6 | 37 |
| 1999 | 5x112 | 66.6 | 37 |
| 2000 | 5x112 | 66.6 | 37 |
| 2001 | 5x112 | 66.6 | 37 |
| 2002 | 5x112 | 66.6 | 37 |
| ▸ 2003 | 5x112 | 66.6 | 37 |
| 2004 | 5x112 | 66.6 | 37 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.5 | 46 |
| 2010 | 5x112 | 66.5 | 46 |
| 2011 | 5x112 | 66.5 | 46 |
| 2012 | 5x112 | 66.5 | 48 |
| 2013 | 5x112 | 66.5 | 48 |
| 2014 | 5x112 | 66.5 | 48 |
| 2015 | 5x112 | 66.5 | 48 |
| 2016 | 5x112 | 66.5 | 48 |
| 2017 | 5x112 | 66.5 | 48 |
| 2018 | 5x112 | 66.5 | 48 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2003 Mercedes-Benz C-Class
For your 2003 Mercedes-Benz C-Class, ensure any aftermarket wheel has a 5x112 bolt pattern and a center bore of at least 66.6mm. If the bore is larger, use hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 37mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is M12x1.5, and the seat type must match—Mercedes typically uses ball seats, but some aftermarket wheels require conical seats. Using incorrect lug nuts can lead to wheel detachment. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz C-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 98.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50-100 miles, then periodically check.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel bearings.
- ✅ If upgrading to larger wheels, confirm clearance with the strut and fender; offsets near 35-40mm are safest.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Mercedes-Benz C-Class — Frequently Asked Questions
What is the bolt pattern for a 2003 Mercedes-Benz C-Class?
The 2003 Mercedes-Benz C-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 37mm.
What other years of Mercedes-Benz C-Class have the same bolt pattern as the 2003?
The Mercedes-Benz C-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
What is the center bore of a 2003 Mercedes-Benz C-Class?
The factory center bore (hub bore) for the 2003 Mercedes-Benz C-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2003 Mercedes-Benz C-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2003 C-Class, the PCD is 5x112.
How tight should I torque the lug nuts on a 2003 Mercedes-Benz C-Class?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2003 Mercedes-Benz?
The 2003 C-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset