2002 Mercedes-Benz CLK-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Mercedes-Benz CLK-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 37 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 CLK-Class — Year-Specific Fitment Context
The 2002 Mercedes-Benz CLK-Class is in year 5 of 12 using the 5x112 pattern (1998–2009). Wheels from any 1998–2009 Mercedes-Benz CLK-Class are cross-compatible with the 2002 model.
Mercedes-Benz CLK-Class Bolt Pattern by Year
The table below shows how the CLK-Class's wheel specifications have changed over the years. The 2002 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2002 Mercedes-Benz CLK-Class
When selecting wheels for your 2002 Mercedes-Benz CLK-Class, the center bore must be 66.6mm or larger; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock is 37mm, but a range of 30-45mm is acceptable depending on width. Going too low (e.g., 20mm) may cause rubbing, while too high (e.g., 50mm) can lead to brake caliper clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—Mercedes typically uses ball seats, but aftermarket wheels may require conical or acorn seats. Never mix seat types, as improper seating can cause wheel detachment. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz CLK-Class appears from 1998 to 2009 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50-100 miles, then periodically check.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.6mm center bore.
- ✅ Verify offset with a test fit: 37mm is ideal; avoid offsets below 30mm to prevent fender rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Mercedes-Benz CLK-Class — Frequently Asked Questions
What is the bolt pattern for a 2002 Mercedes-Benz CLK-Class?
The 2002 Mercedes-Benz CLK-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 37mm.
What other years of Mercedes-Benz CLK-Class have the same bolt pattern as the 2002?
The Mercedes-Benz CLK-Class uses the 5x112 pattern from 1998 through 2009. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Why is matching the 66.6mm center bore important for the 2002 CLK-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Mercedes-Benz fit my 2002 CLK-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I use spacers on my 2002 Mercedes-Benz CLK-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
Do 2002 Mercedes-Benz CLK-Classs use lug bolts or lug nuts?
The 2002 CLK-Class requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset