2008 Mercedes-Benz CLK-Class Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Mercedes-Benz CLK-Class, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x112
Lug Nut / Bolt Size B 12x1.50
Center Bore (CB) 66.6 mm
Offset (ET) 37
Torque Specs 80 ft-lbs (108 Nm)

2008 CLK-Class — Year-Specific Fitment Context

The 2008 Mercedes-Benz CLK-Class is in year 11 of 12 using the 5x112 pattern (1998–2009). Wheels from any 1998–2009 Mercedes-Benz CLK-Class are cross-compatible with the 2008 model.

Mercedes-Benz CLK-Class Bolt Pattern by Year

The table below shows how the CLK-Class's wheel specifications have changed over the years. The 2008 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1998 5x112 66.6 37
1999 5x112 66.6 37
2000 5x112 66.6 37
2001 5x112 66.6 37
2002 5x112 66.6 37
2003 5x112 66.6 37
2004 5x112 66.6 37
2005 5x112 66.6 37
2006 5x112 66.6 37
2007 5x112 66.6 37
▸ 2008 5x112 66.6 37
2009 5x112 66.6 37

Fitment Notes

The 2008 Mercedes-Benz CLK-Class has a bolt pattern of 5x112.

This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Mercedes-Benz CLK-Class appears from 1998 to 2009 (12 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x112 Pattern Context

This bolt pattern appears on 1490 vehicles in our current database and is considered common.

Examples of other vehicles using 5x112:

2008 Mercedes-Benz CLK-Class — Frequently Asked Questions

What is the bolt pattern for a 2008 Mercedes-Benz CLK-Class?

The 2008 Mercedes-Benz CLK-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 37mm.

What other years of Mercedes-Benz CLK-Class have the same bolt pattern as the 2008?

The Mercedes-Benz CLK-Class uses the 5x112 pattern from 1998 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.

What is the factory wheel offset for a 2008 Mercedes-Benz CLK-Class?

The OEM offset for the 2008 CLK-Class is typically around 37mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Do 2008 Mercedes-Benz CLK-Classs use lug bolts or lug nuts?

The 2008 CLK-Class requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Can I put aftermarket wheels on my 2008 Mercedes-Benz CLK-Class?

Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 37mm, and a center bore of at least 66.6mm (using hub rings if larger).

Can I use spacers on my 2008 Mercedes-Benz CLK-Class?

Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Mercedes-Benz CLK-Class is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2008 Mercedes-Benz CLK-Class, please report it via our About page contact so we can verify and update this record.

Mercedes-Benz CLK-Class By Year

1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

Other Mercedes-Benz Models

190 E 300 E 300 SE 400 E 400 SE 500 SEC C-Class E-Class GLB GLC Coupe GLE Mercedes-AMG SLC Mercedes-EQ EQB Mercedes-EQ EQE Mercedes-Maybach EQS SUV Mercedes-Maybach GLS S-Class SL-Class Sprinter 2500 Cargo Sprinter 4500 Cargo