2024 Mercedes-Benz S-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mercedes-Benz S-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 S-Class — Year-Specific Fitment Context
The 2024 model year is the final year of the Mercedes-Benz S-Class's 5x112 bolt pattern run (since 1994). Wheels from any 1994–2024 Mercedes-Benz S-Class are cross-compatible with the 2024 model.
Mercedes-Benz S-Class Bolt Pattern by Year
The table below shows how the S-Class's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 46 |
| 1995 | 5x112 | 66.6 | 46 |
| 1996 | 5x112 | 66.6 | 46 |
| 1997 | 5x112 | 66.6 | 46 |
| 1998 | 5x112 | 66.6 | 46 |
| 1999 | 5x112 | 66.6 | 46 |
| 2000 | 5x112 | 66.6 | 46 |
| 2001 | 5x112 | 66.6 | 46 |
| 2002 | 5x112 | 66.6 | 46 |
| 2003 | 5x112 | 66.6 | 46 |
| 2004 | 5x112 | 66.6 | 46 |
| 2005 | 5x112 | 66.6 | 46 |
| 2006 | 5x112 | 66.6 | 46 |
| 2007 | 5x112 | 66.6 | 46 |
| 2008 | 5x112 | 66.6 | 43 |
| 2009 | 5x112 | 66.6 | 43 |
| 2010 | 5x112 | 66.6 | 43 |
| 2011 | 5x112 | 66.6 | 43 |
| 2012 | 5x112 | 66.6 | 43 |
| 2013 | 5x112 | 66.6 | 43 |
| 2014 | 5x112 | 66.5 | 44 |
| 2015 | 5x112 | 66.5 | 44 |
| 2016 | 5x112 | 66.5 | 44 |
| 2017 | 5x112 | 66.5 | 44 |
| 2018 | 5x112 | 66.5 | 44 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| ▸ 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Mercedes-Benz S-Class
For the 2024 Mercedes-Benz S-Class, the bolt pattern is 5x112 with a critical center bore of 66.6mm. Aftermarket wheels must be hub-centric; use hub-centric rings if the wheel bore is larger to prevent vibration and ensure load is on the hub, not the lugs. Offset range is 30-50mm; staying within this range maintains proper suspension geometry and clearance. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either cone or ball seat as specified by the wheel manufacturer. Improper lug nut seating can lead to wheel loosening. This is the final year for 5x112 on the S-Class; wheels from 1994-2024 models are compatible.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz S-Class appears from 1994 to 2024 (30 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore diameter; if larger than 66.6mm, use hub-centric rings to avoid vibrations.
- ✅ Check offset carefully; offsets outside 30-50mm may cause rubbing or clearance issues with brakes and suspension.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mercedes-Benz S-Class — Frequently Asked Questions
What is the bolt pattern for a 2024 Mercedes-Benz S-Class?
The 2024 Mercedes-Benz S-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz S-Class have the same bolt pattern as the 2024?
The Mercedes-Benz S-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Mercedes-Benz S-Class use?
The 2024 Mercedes-Benz S-Class uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2024 Mercedes-Benz S-Class?
The OEM offset for the 2024 S-Class is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 66.6mm center bore important for the 2024 S-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Mercedes-Benz fit my 2024 S-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset