1997 Mercedes-Benz S-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Mercedes-Benz S-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1997 S-Class — Year-Specific Fitment Context
The 1997 Mercedes-Benz S-Class is in year 4 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz S-Class are cross-compatible with the 1997 model.
Mercedes-Benz S-Class Bolt Pattern by Year
The table below shows how the S-Class's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 46 |
| 1995 | 5x112 | 66.6 | 46 |
| 1996 | 5x112 | 66.6 | 46 |
| ▸ 1997 | 5x112 | 66.6 | 46 |
| 1998 | 5x112 | 66.6 | 46 |
| 1999 | 5x112 | 66.6 | 46 |
| 2000 | 5x112 | 66.6 | 46 |
| 2001 | 5x112 | 66.6 | 46 |
| 2002 | 5x112 | 66.6 | 46 |
| 2003 | 5x112 | 66.6 | 46 |
| 2004 | 5x112 | 66.6 | 46 |
| 2005 | 5x112 | 66.6 | 46 |
| 2006 | 5x112 | 66.6 | 46 |
| 2007 | 5x112 | 66.6 | 46 |
| 2008 | 5x112 | 66.6 | 43 |
| 2009 | 5x112 | 66.6 | 43 |
| 2010 | 5x112 | 66.6 | 43 |
| 2011 | 5x112 | 66.6 | 43 |
| 2012 | 5x112 | 66.6 | 43 |
| 2013 | 5x112 | 66.6 | 43 |
| 2014 | 5x112 | 66.5 | 44 |
| 2015 | 5x112 | 66.5 | 44 |
| 2016 | 5x112 | 66.5 | 44 |
| 2017 | 5x112 | 66.5 | 44 |
| 2018 | 5x112 | 66.5 | 44 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1997 Mercedes-Benz S-Class
For your 1997 Mercedes-Benz S-Class, the correct bolt pattern is 5x112, center bore 66.6mm, and offset around 46mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations and stress on lug studs. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Mercedes typically uses ball seats, but aftermarket wheels may require cone or flat seats. Verify compatibility to avoid wheel separation. Re-torque after 50-100 miles. Wheels from 1994–2024 S-Class models are cross-compatible, but always double-check specifications.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz S-Class appears from 1994 to 2024 (30 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50-100 miles of driving.
- ✅ If using aftermarket wheels, confirm the center bore is 66.6mm or larger with hub rings; never force a smaller bore.
- ✅ Avoid mixing ball-seat and cone-seat lug nuts; use the correct type for your wheel's lug seat design.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Mercedes-Benz S-Class — Frequently Asked Questions
What is the bolt pattern for a 1997 Mercedes-Benz S-Class?
The 1997 Mercedes-Benz S-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 46mm.
What other years of Mercedes-Benz S-Class have the same bolt pattern as the 1997?
The Mercedes-Benz S-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What lug nut size does the 1997 Mercedes-Benz S-Class use?
The 1997 Mercedes-Benz S-Class uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 66.6mm center bore important for the 1997 S-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 46mm offset mean for the 1997 S-Class?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
How tight should I torque the lug nuts on a 1997 Mercedes-Benz S-Class?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset