2014 Mercedes-Benz S-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Mercedes-Benz S-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 S-Class — Year-Specific Fitment Context
The 2014 Mercedes-Benz S-Class is in year 21 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz S-Class are cross-compatible with the 2014 model.
Mercedes-Benz S-Class Bolt Pattern by Year
The table below shows how the S-Class's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 46 |
| 1995 | 5x112 | 66.6 | 46 |
| 1996 | 5x112 | 66.6 | 46 |
| 1997 | 5x112 | 66.6 | 46 |
| 1998 | 5x112 | 66.6 | 46 |
| 1999 | 5x112 | 66.6 | 46 |
| 2000 | 5x112 | 66.6 | 46 |
| 2001 | 5x112 | 66.6 | 46 |
| 2002 | 5x112 | 66.6 | 46 |
| 2003 | 5x112 | 66.6 | 46 |
| 2004 | 5x112 | 66.6 | 46 |
| 2005 | 5x112 | 66.6 | 46 |
| 2006 | 5x112 | 66.6 | 46 |
| 2007 | 5x112 | 66.6 | 46 |
| 2008 | 5x112 | 66.6 | 43 |
| 2009 | 5x112 | 66.6 | 43 |
| 2010 | 5x112 | 66.6 | 43 |
| 2011 | 5x112 | 66.6 | 43 |
| 2012 | 5x112 | 66.6 | 43 |
| 2013 | 5x112 | 66.6 | 43 |
| ▸ 2014 | 5x112 | 66.5 | 44 |
| 2015 | 5x112 | 66.5 | 44 |
| 2016 | 5x112 | 66.5 | 44 |
| 2017 | 5x112 | 66.5 | 44 |
| 2018 | 5x112 | 66.5 | 44 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2014 Mercedes-Benz S-Class
For your 2014 Mercedes-Benz S-Class, the 5x112 bolt pattern is shared across 1994–2024 S-Class models, ensuring broad compatibility. However, the 66.5mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory spec is 44mm, but a range of 35–50mm is acceptable depending on width. Deviating too far can cause rubbing or clearance issues. Always use the correct lug nuts: B 14x1.50 thread pitch with a ball seat (R14) for OEM wheels. Using incorrect seat type (e.g., conical) can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz S-Class appears from 1994 to 2024 (30 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that hub-centric rings are installed to match the 66.5mm center bore.
- ✅ Avoid using wheels with an offset below 35mm or above 50mm to prevent rubbing on suspension or fenders.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Mercedes-Benz S-Class — Frequently Asked Questions
What is the bolt pattern for a 2014 Mercedes-Benz S-Class?
The 2014 Mercedes-Benz S-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 44mm.
What other years of Mercedes-Benz S-Class have the same bolt pattern as the 2014?
The Mercedes-Benz S-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What lug nut size does the 2014 Mercedes-Benz S-Class use?
The 2014 Mercedes-Benz S-Class uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2014 Mercedes-Benz S-Class?
The factory center bore (hub bore) for the 2014 Mercedes-Benz S-Class is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2014 Mercedes-Benz S-Class?
The OEM offset for the 2014 S-Class is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 66.5mm center bore important for the 2014 S-Class?
The 66.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset