2019 Mercedes-Benz S-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Mercedes-Benz S-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 S-Class — Year-Specific Fitment Context
The 2019 Mercedes-Benz S-Class is in year 26 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz S-Class are cross-compatible with the 2019 model.
Mercedes-Benz S-Class Bolt Pattern by Year
The table below shows how the S-Class's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 46 |
| 1995 | 5x112 | 66.6 | 46 |
| 1996 | 5x112 | 66.6 | 46 |
| 1997 | 5x112 | 66.6 | 46 |
| 1998 | 5x112 | 66.6 | 46 |
| 1999 | 5x112 | 66.6 | 46 |
| 2000 | 5x112 | 66.6 | 46 |
| 2001 | 5x112 | 66.6 | 46 |
| 2002 | 5x112 | 66.6 | 46 |
| 2003 | 5x112 | 66.6 | 46 |
| 2004 | 5x112 | 66.6 | 46 |
| 2005 | 5x112 | 66.6 | 46 |
| 2006 | 5x112 | 66.6 | 46 |
| 2007 | 5x112 | 66.6 | 46 |
| 2008 | 5x112 | 66.6 | 43 |
| 2009 | 5x112 | 66.6 | 43 |
| 2010 | 5x112 | 66.6 | 43 |
| 2011 | 5x112 | 66.6 | 43 |
| 2012 | 5x112 | 66.6 | 43 |
| 2013 | 5x112 | 66.6 | 43 |
| 2014 | 5x112 | 66.5 | 44 |
| 2015 | 5x112 | 66.5 | 44 |
| 2016 | 5x112 | 66.5 | 44 |
| 2017 | 5x112 | 66.5 | 44 |
| 2018 | 5x112 | 66.5 | 44 |
| ▸ 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Mercedes-Benz S-Class
For your 2019 Mercedes-Benz S-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration. Offset range is 30-50mm; staying within 35-45mm is recommended for proper clearance. Always use 14x1.5 lug nuts with the correct seat—Mercedes typically uses ball seat, but confirm with your wheel manufacturer. Improper lug nut seating can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz S-Class appears from 1994 to 2024 (30 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110-130 Nm after 50-100 miles of driving.
- ✅ Verify wheel bore is 66.6mm or use hub-centric rings; avoid wobble.
- ✅ Check brake caliper clearance, especially with aftermarket wheels and low offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Mercedes-Benz S-Class — Frequently Asked Questions
What is the bolt pattern for a 2019 Mercedes-Benz S-Class?
The 2019 Mercedes-Benz S-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz S-Class have the same bolt pattern as the 2019?
The Mercedes-Benz S-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 Mercedes-Benz S-Class use?
The 2019 Mercedes-Benz S-Class uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 30-50mm offset mean for the 2019 S-Class?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the center bore of a 2019 Mercedes-Benz S-Class?
The factory center bore (hub bore) for the 2019 Mercedes-Benz S-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.6mm center bore important for the 2019 S-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset