2014 Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Mercedes-Benz Sprinter 2500 Passenger is 6x130. It has a center bore of 84.1 mm, an offset range of 50, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2014 Mercedes-Benz Sprinter 2500 Passenger Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Center Bore (Hub Bore) | 84.1 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2014 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2014 Mercedes-Benz Sprinter 2500 Passenger is in year 4 of 9 using the 6x130 pattern (2011–2019). Wheels from any 2011–2019 Mercedes-Benz Sprinter 2500 Passenger are cross-compatible with the 2014 model. Across its full production run (2011–2024), the Sprinter 2500 Passenger has also used: 5x112.
Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2014 model year is highlighted.
2014 Mercedes-Benz Sprinter 2500 Passenger Wheel Interchange & Donor Fitment Guide (6x130)
The 6x130 bolt pattern is shared by 71 vehicles in our database (uncommon). For safe wheel swaps on the 2014 Mercedes-Benz Sprinter 2500 Passenger, donor rims must match the 6x130 PCD and have a center bore of at least 84.1 mm:
DIRECT HUB MATCH Same 6x130 Pattern & Exact 84.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2015 Freightliner Sprinter 2500 Cargo | 84.1 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2013 Freightliner Sprinter 2500 Crew | 84.1 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2013 Freightliner Sprinter 2500 Passenger | 84.1 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2017 Freightliner Sprinter WORKER Cargo | 84.1 mm (Exact) | 50-60mm | M14x1.5 (Cone) |
| 2017 Freightliner Sprinter WORKER Passenger | 84.1 mm (Exact) | 50-60mm | M14x1.5 (Cone) |
| 2024 Mercedes-Benz eSprinter | 84.1 mm (Exact) | 30-50 | 14x1.5 (Ball) |
Expert Buying Guide for 2014 Mercedes-Benz Sprinter 2500 Passenger
For your 2014 Mercedes-Benz Sprinter 2500 Passenger, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels must have a center bore of at least 84.1mm; use hub-centric rings to avoid vibrations. The recommended offset is 50mm; deviations of ±5mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to ensure proper clamping force. Never mix lug nut types. Re-torque after 50-100 miles. Wheels from 2011-2019 Sprinter 2500 Passenger models are direct fit.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Passenger appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 130-140 ft-lbs after 50 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on hubs.
- ✅ Check for brake caliper clearance when using wheels with offset below 45mm or above 55mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2014 Mercedes-Benz Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2014 Mercedes-Benz Sprinter 2500 Passenger?
The 2014 Mercedes-Benz Sprinter 2500 Passenger uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Mercedes-Benz Sprinter 2500 Passenger have the same bolt pattern as the 2014?
The Mercedes-Benz Sprinter 2500 Passenger uses the 6x130 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2014 Mercedes-Benz?
The 2014 Sprinter 2500 Passenger uses a 6x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2014 Mercedes-Benz Sprinter 2500 Passenger?
Absolutely. Just ensure the aftermarket wheels have a 6x130 bolt pattern, an offset near 50mm, and a center bore of at least 84.1mm (using hub rings if larger).
Will wheels from another Mercedes-Benz fit my 2014 Sprinter 2500 Passenger?
Only if they share the exact same 6x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 84.1mm.
What is the center bore of a 2014 Mercedes-Benz Sprinter 2500 Passenger?
The factory center bore (hub bore) for the 2014 Mercedes-Benz Sprinter 2500 Passenger is 84.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →