2021 Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Mercedes-Benz Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2021 Mercedes-Benz Sprinter 2500 Passenger is in year 2 of 5 using the 5x112 pattern (2020–2024). Wheels from any 2020–2024 Mercedes-Benz Sprinter 2500 Passenger are cross-compatible with the 2021 model. Across its full production run (2011–2024), the Sprinter 2500 Passenger has also used: 6x130.
Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2021 Mercedes-Benz Sprinter 2500 Passenger
For your 2021 Mercedes-Benz Sprinter 2500 Passenger, the critical center bore is 66.6mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 30-50mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either cone or ball seat, matching the wheel's design. Incorrect lug nuts can cause wheel loosening or damage. Verify compatibility with 2020–2024 Sprinter models, as earlier years (2011–2019) used a 6x130 bolt pattern.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Passenger appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibration and stress on studs can result.
- ✅ Check brake caliper clearance when selecting wheels, especially with offsets near 30mm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Mercedes-Benz Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2021 Mercedes-Benz Sprinter 2500 Passenger?
The 2021 Mercedes-Benz Sprinter 2500 Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 2500 Passenger have the same bolt pattern as the 2021?
The Mercedes-Benz Sprinter 2500 Passenger uses the 5x112 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
Will wheels from another Mercedes-Benz fit my 2021 Sprinter 2500 Passenger?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I use spacers on my 2021 Mercedes-Benz Sprinter 2500 Passenger?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2021 Mercedes-Benz?
The 2021 Sprinter 2500 Passenger uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2021 Mercedes-Benz Sprinter 2500 Passenger?
The factory center bore (hub bore) for the 2021 Mercedes-Benz Sprinter 2500 Passenger is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset