2011 Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mercedes-Benz Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2011 model year marks the beginning of the Mercedes-Benz Sprinter 2500 Passenger's 6x130 bolt pattern era, which continued through 2019 (9 consecutive years). Wheels from any 2011–2019 Mercedes-Benz Sprinter 2500 Passenger are cross-compatible with the 2011 model. Across its full production run (2011–2024), the Sprinter 2500 Passenger has also used: 5x112.
Mercedes-Benz Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2011 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2011 Mercedes-Benz Sprinter 2500 Passenger
For your 2011 Mercedes-Benz Sprinter 2500 Passenger, the 6x130 bolt pattern is shared with 2011–2019 models, ensuring cross-compatibility. The 84.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and load stress. Offset is critical: stock is 50mm; deviations affect handling and tire clearance. Always use 14x1.5 lug nuts with proper seat type (cone or ball) to avoid loosening. Verify wheel load rating matches the vehicle's GVWR. Hub-centric fitment is non-negotiable for safety.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Passenger appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 40mm or above 60mm to prevent rubbing or bearing stress.
- ✅ Ensure aftermarket wheels have a center bore ≥84.1mm; use hub-centric rings to reduce bore to 84.1mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mercedes-Benz Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2011 Mercedes-Benz Sprinter 2500 Passenger?
The 2011 Mercedes-Benz Sprinter 2500 Passenger uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Mercedes-Benz Sprinter 2500 Passenger have the same bolt pattern as the 2011?
The Mercedes-Benz Sprinter 2500 Passenger uses the 6x130 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 Mercedes-Benz Sprinter 2500 Passenger?
Absolutely. Just ensure the aftermarket wheels have a 6x130 bolt pattern, an offset near 50mm, and a center bore of at least 84.1mm (using hub rings if larger).
What is the center bore of a 2011 Mercedes-Benz Sprinter 2500 Passenger?
The factory center bore (hub bore) for the 2011 Mercedes-Benz Sprinter 2500 Passenger is 84.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2011 Mercedes-Benz Sprinter 2500 Passenger use?
The 2011 Mercedes-Benz Sprinter 2500 Passenger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2011 Mercedes-Benz?
The 2011 Sprinter 2500 Passenger uses a 6x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset