2007 Mercury Montego Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mercury Montego, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 35-50mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Montego — Year-Specific Fitment Context
The 2007 model year is the final year of the Mercury Montego's 5x114.3 bolt pattern run (since 2005). Wheels from any 2005–2007 Mercury Montego are cross-compatible with the 2007 model.
Mercury Montego Bolt Pattern by Year
The table below shows how the Montego's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Mercury Montego
For your 2007 Mercury Montego, the 5x114.3 bolt pattern is shared with many vehicles, but the 63.4mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range of 35-50mm is sensitive; deviating can cause rubbing or clearance issues with suspension and brakes. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. Verify lug nut engagement (at least 6-8 full turns) and torque to manufacturer specs (100 ft-lbs).
Historical Fitment Data Reference
In our dataset, Mercury Montego appears from 2005 to 2007 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check inner clearance for aftermarket wheels; the Montego's brake calipers are large and may require spacers or specific offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Mercury Montego — Frequently Asked Questions
What is the bolt pattern for a 2007 Mercury Montego?
The 2007 Mercury Montego uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35-50mmmm.
What other years of Mercury Montego have the same bolt pattern as the 2007?
The Mercury Montego uses the 5x114.3 pattern from 2005 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 Mercury?
The 2007 Montego uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2007 Mercury Montego?
The factory center bore (hub bore) for the 2007 Mercury Montego is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2007 Mercury Montego?
The OEM offset for the 2007 Montego is typically around 35-50mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 63.4mm center bore important for the 2007 Montego?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset