1996 Mitsubishi Mighty Max Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Mitsubishi Mighty Max Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 Mighty Max Regular Cab — Year-Specific Fitment Context
The 1996 model year is the final year of the Mitsubishi Mighty Max Regular Cab's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1996 Mitsubishi Mighty Max Regular Cab are cross-compatible with the 1996 model.
Mitsubishi Mighty Max Regular Cab Bolt Pattern by Year
The table below shows how the Mighty Max Regular Cab's wheel specifications have changed over the years. The 1996 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Mitsubishi Mighty Max Regular Cab
For your 1996 Mitsubishi Mighty Max Regular Cab, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 38-46mm; deviating risks rubbing or bearing stress. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or tapered seats. Mismatched lug nuts can cause wheel loosening. Verify thread engagement and torque to spec (80-100 ft-lbs). Hub-centric rings and proper lug nuts are non-negotiable for safety.
Historical Fitment Data Reference
In our dataset, Mitsubishi Mighty Max Regular Cab appears from 1992 to 1996 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibration and stud failure are common.
- ✅ Check for caliper clearance with aftermarket wheels, as the Mighty Max has tight front brake clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Mitsubishi Mighty Max Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1996 Mitsubishi Mighty Max Regular Cab?
The 1996 Mitsubishi Mighty Max Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Mighty Max Regular Cab have the same bolt pattern as the 1996?
The Mitsubishi Mighty Max Regular Cab uses the 5x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 1996 Mighty Max Regular Cab?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 1996 Mitsubishi Mighty Max Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Mitsubishi fit my 1996 Mighty Max Regular Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 1996 Mitsubishi Mighty Max Regular Cab?
The OEM offset for the 1996 Mighty Max Regular Cab is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset