1995 Mitsubishi Mirage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Mitsubishi Mirage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Mirage — Year-Specific Fitment Context
The 1995 Mitsubishi Mirage is in year 4 of 33 using the 4x100 pattern (1992–2024). Wheels from any 1992–2024 Mitsubishi Mirage are cross-compatible with the 1995 model.
Mitsubishi Mirage Bolt Pattern by Year
The table below shows how the Mirage's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 56.1 | 46 |
| 1993 | 4x100 | 56.1 | 46 |
| 1994 | 4x100 | 56.1 | 46 |
| ▸ 1995 | 4x100 | 56.1 | 46 |
| 1996 | 4x100 | 56.1 | 46 |
| 1997 | 4x100 | 56.1 | 46 |
| 1998 | 4x100 | 56.1 | 46 |
| 1999 | 4x100 | 56.1 | 46 |
| 2000 | 4x100 | 56.1 | 46 |
| 2001 | 4x100 | 56.1 | 46 |
| 2002 | 4x100 | 56.1 | 46 |
| 2014 | 4x100 | 56.1 | 35 |
| 2015 | 4x100 | 56.1 | 46 |
| 2017 | 4x100 | 56.1 | 46 |
| 2018 | 4x100 | 56.1 | 46 |
| 2019 | 4x100 | 56.1 | 46 |
| 2020 | 4x100 | 56.1 | 46 |
| 2021 | 4x100 | 56.1 | 46 |
| 2022 | 4x100 | 56.1 | 46 |
| 2023 | 4x100 | 56.1 | 46 |
| 2024 | 4x100 | 56.1 | 46 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1995 Mitsubishi Mirage
The 1995 Mitsubishi Mirage uses a 4x100 bolt pattern with a 56.1mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type: use conical (60-degree) or ball seat nuts as specified. Never use incorrect lug nuts—this can lead to wheel detachment. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Mirage appears from 1992 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 56.1mm center bore.
- ✅ Check offset carefully: wheels with offset below 41mm may rub suspension components; above 51mm may contact the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Mitsubishi Mirage — Frequently Asked Questions
What is the bolt pattern for a 1995 Mitsubishi Mirage?
The 1995 Mitsubishi Mirage uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Mitsubishi Mirage have the same bolt pattern as the 1995?
The Mitsubishi Mirage uses the 4x100 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What lug nut size does the 1995 Mitsubishi Mirage use?
The 1995 Mitsubishi Mirage uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 1995 Mitsubishi Mirage?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1995 Mitsubishi Mirage?
The OEM offset for the 1995 Mirage is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1995 Mitsubishi Mirage?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset