2014 Mitsubishi Mirage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Mitsubishi Mirage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 Mirage — Year-Specific Fitment Context
The 2014 Mitsubishi Mirage is in year 23 of 33 using the 4x100 pattern (1992–2024). Wheels from any 1992–2024 Mitsubishi Mirage are cross-compatible with the 2014 model.
Mitsubishi Mirage Bolt Pattern by Year
The table below shows how the Mirage's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 56.1 | 46 |
| 1993 | 4x100 | 56.1 | 46 |
| 1994 | 4x100 | 56.1 | 46 |
| 1995 | 4x100 | 56.1 | 46 |
| 1996 | 4x100 | 56.1 | 46 |
| 1997 | 4x100 | 56.1 | 46 |
| 1998 | 4x100 | 56.1 | 46 |
| 1999 | 4x100 | 56.1 | 46 |
| 2000 | 4x100 | 56.1 | 46 |
| 2001 | 4x100 | 56.1 | 46 |
| 2002 | 4x100 | 56.1 | 46 |
| ▸ 2014 | 4x100 | 56.1 | 35 |
| 2015 | 4x100 | 56.1 | 46 |
| 2017 | 4x100 | 56.1 | 46 |
| 2018 | 4x100 | 56.1 | 46 |
| 2019 | 4x100 | 56.1 | 46 |
| 2020 | 4x100 | 56.1 | 46 |
| 2021 | 4x100 | 56.1 | 46 |
| 2022 | 4x100 | 56.1 | 46 |
| 2023 | 4x100 | 56.1 | 46 |
| 2024 | 4x100 | 56.1 | 46 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2014 Mitsubishi Mirage
The 2014 Mitsubishi Mirage uses a 4x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper centering and reduce vibration. The recommended offset is 35mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the Mirage requires 12x1.50 thread pitch with conical (60-degree) or ball seats. Using incorrect lug nuts can lead to wheel detachment. For optimal safety, choose wheels with a load rating exceeding the vehicle's gross axle weight rating.
Historical Fitment Data Reference
In our dataset, Mitsubishi Mirage appears from 1992 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with an offset below 30mm or above 40mm to prevent fender rubbing or brake caliper contact.
- ✅ When using aftermarket wheels, always install hub-centric rings (56.1mm ID to wheel's hub bore) to eliminate vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Mitsubishi Mirage — Frequently Asked Questions
What is the bolt pattern for a 2014 Mitsubishi Mirage?
The 2014 Mitsubishi Mirage uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Mirage have the same bolt pattern as the 2014?
The Mitsubishi Mirage uses the 4x100 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What lug nut size does the 2014 Mitsubishi Mirage use?
The 2014 Mitsubishi Mirage uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2014 Mitsubishi Mirage?
The factory center bore (hub bore) for the 2014 Mitsubishi Mirage is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2014 Mitsubishi Mirage?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Mirage, the PCD is 4x100.
Why is matching the 56.1mm center bore important for the 2014 Mirage?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset