2006 Mitsubishi Raider Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Mitsubishi Raider Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Raider Double Cab — Year-Specific Fitment Context
The 2006 model year marks the beginning of the Mitsubishi Raider Double Cab's 4x100 bolt pattern era, which continued through 2009 (4 consecutive years). Wheels from any 2006–2009 Mitsubishi Raider Double Cab are cross-compatible with the 2006 model.
Mitsubishi Raider Double Cab Bolt Pattern by Year
The table below shows how the Raider Double Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2006 Mitsubishi Raider Double Cab
For your 2006 Mitsubishi Raider Double Cab, the 4x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; the factory 35mm offset should be maintained within ±5mm to avoid rubbing or clearance issues. Always use the correct lug nuts: 12x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Raider Double Cab appears from 2006 to 2009 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 56.1mm center bore.
- ✅ Avoid wheels with offset below 30mm or above 40mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Mitsubishi Raider Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Mitsubishi Raider Double Cab?
The 2006 Mitsubishi Raider Double Cab uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Raider Double Cab have the same bolt pattern as the 2006?
The Mitsubishi Raider Double Cab uses the 4x100 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 56.1mm center bore important for the 2006 Raider Double Cab?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2006 Mitsubishi Raider Double Cab?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2006 Mitsubishi?
The 2006 Raider Double Cab uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2006 Mitsubishi Raider Double Cab?
The factory center bore (hub bore) for the 2006 Mitsubishi Raider Double Cab is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset