2009 Mitsubishi Raider Double Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Mitsubishi Raider Double Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x100
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 56.1 mm
Offset (ET) 35
Torque Specs 80 ft-lbs (108 Nm)

2009 Raider Double Cab — Year-Specific Fitment Context

The 2009 model year is the final year of the Mitsubishi Raider Double Cab's 4x100 bolt pattern run (since 2006). Wheels from any 2006–2009 Mitsubishi Raider Double Cab are cross-compatible with the 2009 model.

Mitsubishi Raider Double Cab Bolt Pattern by Year

The table below shows how the Raider Double Cab's wheel specifications have changed over the years. The 2009 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2006 4x100 56.1 35
2007 4x100 56.1 35
2008 4x100 56.1 35
▸ 2009 4x100 56.1 35

Fitment Notes

The 2009 Mitsubishi Raider Double Cab has a bolt pattern of 4x100.

This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Mitsubishi Raider Double Cab appears from 2006 to 2009 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

4x100 Pattern Context

This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 4x100:

2009 Mitsubishi Raider Double Cab — Frequently Asked Questions

What is the bolt pattern for a 2009 Mitsubishi Raider Double Cab?

The 2009 Mitsubishi Raider Double Cab uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.

What other years of Mitsubishi Raider Double Cab have the same bolt pattern as the 2009?

The Mitsubishi Raider Double Cab uses the 4x100 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2009 Mitsubishi?

The 2009 Raider Double Cab uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Can I put aftermarket wheels on my 2009 Mitsubishi Raider Double Cab?

Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 35mm, and a center bore of at least 56.1mm (using hub rings if larger).

What does 35mm offset mean for the 2009 Raider Double Cab?

An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.

What lug nut size does the 2009 Mitsubishi Raider Double Cab use?

The 2009 Mitsubishi Raider Double Cab uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Mitsubishi Raider Double Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2009 Mitsubishi Raider Double Cab, please report it via our About page contact so we can verify and update this record.

Mitsubishi Raider Double Cab By Year

2006 2007 2008 2009

Other Mitsubishi Models

3000GT Diamante Eclipse Eclipse Cross Endeavor Expo Galant Lancer Mighty Max Macro Cab Mighty Max Regular Cab Mirage G4 Montero Montero Sport Outlander Outlander PHEV Outlander Sport Precis Raider Double Cab Raider Extended Cab i-MiEV