2004 Nissan 350Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Nissan 350Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 350Z — Year-Specific Fitment Context
The 2004 Nissan 350Z is in year 2 of 7 using the 5x114.3 pattern (2003–2009). Wheels from any 2003–2009 Nissan 350Z are cross-compatible with the 2004 model.
Nissan 350Z Bolt Pattern by Year
The table below shows how the 350Z's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Nissan 350Z has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan 350Z appears from 2003 to 2009 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2004 Nissan 350Z — Frequently Asked Questions
What is the bolt pattern for a 2004 Nissan 350Z?
The 2004 Nissan 350Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 32mm.
What other years of Nissan 350Z have the same bolt pattern as the 2004?
The Nissan 350Z uses the 5x114.3 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Do 2004 Nissan 350Zs use lug bolts or lug nuts?
The 2004 350Z requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2004 Nissan?
The 2004 350Z uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Nissan fit my 2004 350Z?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the factory wheel offset for a 2004 Nissan 350Z?
The OEM offset for the 2004 350Z is typically around 32mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan 350Z is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2009 (7 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Nissan 350Z, please report it via our About page contact so we can verify and update this record.