2007 Nissan 350Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Nissan 350Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 350Z — Year-Specific Fitment Context
The 2007 Nissan 350Z is in year 5 of 7 using the 5x114.3 pattern (2003–2009). Wheels from any 2003–2009 Nissan 350Z are cross-compatible with the 2007 model.
Nissan 350Z Bolt Pattern by Year
The table below shows how the 350Z's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Nissan 350Z
For your 2007 Nissan 350Z, the correct bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 32mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Never mix seat types, as improper engagement can lead to wheel loss. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan 350Z appears from 2003 to 2009 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.1mm without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check for brake caliper clearance when using wheels with offset below 27mm or above 37mm, especially with aftermarket brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Nissan 350Z — Frequently Asked Questions
What is the bolt pattern for a 2007 Nissan 350Z?
The 2007 Nissan 350Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 32mm.
What other years of Nissan 350Z have the same bolt pattern as the 2007?
The Nissan 350Z uses the 5x114.3 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 Nissan?
The 2007 350Z uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2007 Nissan 350Z?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2007 Nissan 350Z?
The factory center bore (hub bore) for the 2007 Nissan 350Z is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2007 Nissan 350Z use?
The 2007 Nissan 350Z uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset