2009 Nissan Xterra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Nissan Xterra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 Xterra — Year-Specific Fitment Context
The 2009 Nissan Xterra is in year 5 of 11 using the 6x114.3 pattern (2005–2015). Wheels from any 2005–2015 Nissan Xterra are cross-compatible with the 2009 model. Across its full production run (2000–2015), the Xterra has also used: 6x139.7.
Nissan Xterra Bolt Pattern by Year
The table below shows how the Xterra's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| ▸ 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2009 Nissan Xterra
For your 2009 Nissan Xterra, the critical fitment specs are: bolt pattern 6x114.3, center bore 66.1mm, offset 30mm, and lug nut size 12x1.25. When selecting aftermarket wheels, ensure the center bore is at least 66.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive—deviating more than ±5mm from 30mm may cause rubbing or clearance issues with suspension/brakes. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree for most aftermarket wheels; OEM uses ball seat). Avoid mixing seat types to prevent wheel loosening. Re-torque after 50-100 miles. Wheels from 2005-2015 Xterra models are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Xterra appears from 2000 to 2015 (16 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (66.1mm ID to wheel bore OD) to avoid vibrations.
- ✅ Verify wheel offset stays within 25-35mm to prevent rubbing on struts or fenders; test fit before final installation.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Nissan Xterra — Frequently Asked Questions
What is the bolt pattern for a 2009 Nissan Xterra?
The 2009 Nissan Xterra uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Xterra have the same bolt pattern as the 2009?
The Nissan Xterra uses the 6x114.3 pattern from 2005 through 2015. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2009 Nissan Xterra?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2009 Nissan Xterra use?
The 2009 Nissan Xterra uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 66.1mm center bore important for the 2009 Xterra?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2009 Nissan Xterra?
The OEM offset for the 2009 Xterra is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset