2010 Nissan Xterra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan Xterra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Xterra — Year-Specific Fitment Context
The 2010 Nissan Xterra is in year 6 of 11 using the 6x114.3 pattern (2005–2015). Wheels from any 2005–2015 Nissan Xterra are cross-compatible with the 2010 model. Across its full production run (2000–2015), the Xterra has also used: 6x139.7.
Nissan Xterra Bolt Pattern by Year
The table below shows how the Xterra's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| ▸ 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2010 Nissan Xterra
For your 2010 Nissan Xterra, the 6x114.3 bolt pattern is shared with 2005–2015 models, ensuring cross-compatibility. The 66.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive—stick to a 30mm range to avoid rubbing or suspension interference. Always use lug nuts with 12x1.25 thread pitch and the correct seat (cone or ball) matching your wheels; mismatched seats can cause loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Xterra appears from 2000 to 2015 (16 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel shake.
- ✅ Check for brake caliper clearance when changing offset, especially with larger aftermarket wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan Xterra — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan Xterra?
The 2010 Nissan Xterra uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Xterra have the same bolt pattern as the 2010?
The Nissan Xterra uses the 6x114.3 pattern from 2005 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2010 Xterra?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2010 Nissan Xterra?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2010 Nissan Xterra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Xterra, the PCD is 6x114.3.
What is the center bore of a 2010 Nissan Xterra?
The factory center bore (hub bore) for the 2010 Nissan Xterra is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset