2007 Nissan Xterra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Nissan Xterra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Xterra — Year-Specific Fitment Context
The 2007 Nissan Xterra is in year 3 of 11 using the 6x114.3 pattern (2005–2015). Wheels from any 2005–2015 Nissan Xterra are cross-compatible with the 2007 model. Across its full production run (2000–2015), the Xterra has also used: 6x139.7.
Nissan Xterra Bolt Pattern by Year
The table below shows how the Xterra's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| ▸ 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2007 Nissan Xterra
For your 2007 Nissan Xterra, ensure aftermarket wheels match the 6x114.3 bolt pattern and 66.1mm center bore. Hub-centric rings are mandatory to prevent vibration and stress on lug studs. The factory offset is 30mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with 12x1.25 thread pitch and a conical (60-degree) seat—never ball seat. Verify that the wheel's hub bore is at least 66.1mm; if larger, use rings. Failure to address these specs can lead to wheel separation or damage.
Historical Fitment Data Reference
In our dataset, Nissan Xterra appears from 2000 to 2015 (16 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 25mm or above 35mm to prevent fender rubbing or brake clearance issues.
- ✅ Check that aftermarket wheels have a hub bore of at least 66.1mm; use hub-centric rings if the bore is larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Nissan Xterra — Frequently Asked Questions
What is the bolt pattern for a 2007 Nissan Xterra?
The 2007 Nissan Xterra uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Xterra have the same bolt pattern as the 2007?
The Nissan Xterra uses the 6x114.3 pattern from 2005 through 2015. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use spacers on my 2007 Nissan Xterra?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What lug nut size does the 2007 Nissan Xterra use?
The 2007 Nissan Xterra uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2007 Nissan Xterra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Xterra, the PCD is 6x114.3.
Why is matching the 66.1mm center bore important for the 2007 Xterra?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset