2011 Nissan Xterra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Nissan Xterra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Xterra — Year-Specific Fitment Context
The 2011 Nissan Xterra is in year 7 of 11 using the 6x114.3 pattern (2005–2015). Wheels from any 2005–2015 Nissan Xterra are cross-compatible with the 2011 model. Across its full production run (2000–2015), the Xterra has also used: 6x139.7.
Nissan Xterra Bolt Pattern by Year
The table below shows how the Xterra's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| ▸ 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2011 Nissan Xterra
For your 2011 Nissan Xterra, the 6x114.3 bolt pattern is shared with 2005–2015 models. The 66.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; stock is 30mm, but aftermarket wheels should stay within ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and a conical (60-degree) seat—never ball seat. Improper lug nuts can cause wheel loss. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Xterra appears from 2000 to 2015 (16 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85–95 ft-lbs after 50–100 miles, then periodically check.
- ✅ Avoid wheels with offset below 25mm or above 35mm to prevent rubbing on suspension or fenders.
- ✅ If using wheels from a 6x139.7 Xterra (2000–2004), they will not fit without adapters; never force them.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Nissan Xterra — Frequently Asked Questions
What is the bolt pattern for a 2011 Nissan Xterra?
The 2011 Nissan Xterra uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Xterra have the same bolt pattern as the 2011?
The Nissan Xterra uses the 6x114.3 pattern from 2005 through 2015. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Nissan Xterra use?
The 2011 Nissan Xterra uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2011 Nissan Xterra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Xterra, the PCD is 6x114.3.
How do I measure the bolt pattern on my 2011 Nissan?
The 2011 Xterra uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2011 Nissan Xterra?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset