2012 Nissan Xterra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Nissan Xterra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 Xterra — Year-Specific Fitment Context
The 2012 Nissan Xterra is in year 8 of 11 using the 6x114.3 pattern (2005–2015). Wheels from any 2005–2015 Nissan Xterra are cross-compatible with the 2012 model. Across its full production run (2000–2015), the Xterra has also used: 6x139.7.
Nissan Xterra Bolt Pattern by Year
The table below shows how the Xterra's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| ▸ 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2012 Nissan Xterra
For your 2012 Nissan Xterra, the critical fitment specs are a 6x114.3 bolt pattern, 66.1mm center bore, and 30mm offset. Aftermarket wheels with a larger center bore require hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive; staying within ±5mm of 30mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and a conical (60-degree) seat—never ball seat—to ensure safe clamping. Re-torque after 50-100 miles. Note: 2005-2015 Xterra wheels are direct swaps, but earlier models (2000-2004) use 6x139.7; those are not compatible.
Historical Fitment Data Reference
In our dataset, Nissan Xterra appears from 2000 to 2015 (16 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a center bore larger than 66.1mm to prevent vibrations.
- ✅ Stick to offset between 25-35mm; going lower may cause tire rub on suspension or fenders.
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Nissan Xterra — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan Xterra?
The 2012 Nissan Xterra uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Xterra have the same bolt pattern as the 2012?
The Nissan Xterra uses the 6x114.3 pattern from 2005 through 2015. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2012 Nissan?
The 2012 Xterra uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2012 Nissan Xterra?
The factory center bore (hub bore) for the 2012 Nissan Xterra is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Nissan fit my 2012 Xterra?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the PCD for a 2012 Nissan Xterra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Xterra, the PCD is 6x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset