2024 Ram RAMSA Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Ram RAMSA, along with offset and center bore data.
2024 Ram RAMSA Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 18-25 |
| Torque Specs | 130 ft-lbs (176 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2024 RAMSA — Year-Specific Fitment Context
The 2024 is the only model year of the Ram RAMSA in our database using the 5x139.7 bolt pattern.
5x139.7 Pattern Context
This bolt pattern appears on 343 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 130 ft-lbs (176 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Ram RAMSA — Frequently Asked Questions
What is the bolt pattern for a 2024 Ram RAMSA?
The 2024 Ram RAMSA uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 18-25mm.
What is the center bore of a 2024 Ram RAMSA?
The factory center bore (hub bore) for the 2024 Ram RAMSA is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2024 Ram RAMSA?
The OEM offset for the 2024 RAMSA is typically around 18-25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2024 Ram RAMSA?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 18-25mm, and a center bore of at least 77.8mm (using hub rings if larger).
How do I measure the bolt pattern on my 2024 Ram?
The 2024 RAMSA uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2024 Ram RAMSA?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset