2024 Rivian R1T Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Rivian R1T, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 30-48mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 R1T — Year-Specific Fitment Context
The 2024 model year is the final year of the Rivian R1T's 5x139.7 bolt pattern run (since 2021). Wheels from any 2021–2024 Rivian R1T are cross-compatible with the 2024 model.
Rivian R1T Bolt Pattern by Year
The table below shows how the R1T's wheel specifications have changed over the years. The 2024 model year is highlighted.
Fitment Notes
The 2024 Rivian R1T has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Rivian R1T appears from 2021 to 2024 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 78.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2024 Rivian R1T — Frequently Asked Questions
What is the bolt pattern for a 2024 Rivian R1T?
The 2024 Rivian R1T uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 30-48mmmm.
What other years of Rivian R1T have the same bolt pattern as the 2024?
The Rivian R1T uses the 5x139.7 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 Rivian R1T?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
What is the PCD for a 2024 Rivian R1T?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 R1T, the PCD is 5x139.7.
Can I put aftermarket wheels on my 2024 Rivian R1T?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 30-48mmmm, and a center bore of at least 64.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2024 Rivian R1T?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Rivian R1T is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2021-2024 (3 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 78.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Rivian R1T, please report it via our About page contact so we can verify and update this record.