2025 Rivian R1T Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Rivian R1T, along with offset and center bore data.
2025 Rivian R1T Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2025 R1T — Year-Specific Fitment Context
The 2025 model year is the final year of the Rivian R1T's 5x139.7 bolt pattern run (since 2021). Wheels from any 2021–2025 Rivian R1T are cross-compatible with the 2025 model.
Rivian R1T Bolt Pattern by Year
The table below shows how the R1T's wheel specifications have changed over the years. The 2025 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 343 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Rivian R1T — Frequently Asked Questions
What is the bolt pattern for a 2025 Rivian R1T?
The 2025 Rivian R1T uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Rivian R1T have the same bolt pattern as the 2025?
The Rivian R1T uses the 5x139.7 pattern from 2021 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2025 Rivian?
The 2025 R1T uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2025 Rivian R1T?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2025 Rivian R1T?
The factory center bore (hub bore) for the 2025 Rivian R1T is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2025 Rivian R1T?
The OEM offset for the 2025 R1T is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset