2001 Suzuki Jimny Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Suzuki Jimny, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108.1 mm |
| Offset (ET) | 22 |
| Torque Specs | 85 ft-lbs (115 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2001 Jimny — Year-Specific Fitment Context
The 2001 Suzuki Jimny is in year 4 of 29 using the 5x139.7 pattern (1998–2026). Wheels from any 1998–2026 Suzuki Jimny are cross-compatible with the 2001 model.
Suzuki Jimny Bolt Pattern by Year
The table below shows how the Jimny's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x139.7 | 108.1 | 22 |
| 1999 | 5x139.7 | 108.1 | 22 |
| 2000 | 5x139.7 | 108.1 | 22 |
| ▸ 2001 | 5x139.7 | 108.1 | 22 |
| 2002 | 5x139.7 | 108.1 | 22 |
| 2003 | 5x139.7 | 108.1 | 22 |
| 2004 | 5x139.7 | 108.1 | 22 |
| 2005 | 5x139.7 | 108.1 | 22 |
| 2006 | 5x139.7 | 108.1 | 22 |
| 2007 | 5x139.7 | 108.1 | 22 |
| 2008 | 5x139.7 | 108.1 | 22 |
| 2009 | 5x139.7 | 108.1 | 22 |
| 2010 | 5x139.7 | 108.1 | 22 |
| 2011 | 5x139.7 | 108.1 | 22 |
| 2012 | 5x139.7 | 108.1 | 22 |
| 2013 | 5x139.7 | 108.1 | 22 |
| 2014 | 5x139.7 | 108.1 | 22 |
| 2015 | 5x139.7 | 108.1 | 22 |
| 2016 | 5x139.7 | 108.1 | 22 |
| 2017 | 5x139.7 | 108.1 | 22 |
| 2018 | 5x139.7 | 108.1 | 22 |
| 2019 | 5x139.7 | 108.1 | 22 |
| 2020 | 5x139.7 | 108.1 | 22 |
| 2021 | 5x139.7 | 108.1 | 22 |
| 2022 | 5x139.7 | 108.1 | 22 |
| 2023 | 5x139.7 | 108.1 | 22 |
| 2024 | 5x139.7 | 108.1 | 22 |
| 2025 | 5x139.7 | 108.1 | 22 |
| 2026 | 5x139.7 | 108.1 | 22 |
5x139.7 Pattern Context
This bolt pattern appears on 319 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2001 Suzuki Jimny
For the 2001 Suzuki Jimny (JB23 3rd generation), the 5x139.7 bolt pattern is shared across 1998-2017 models. The large 108.1mm center bore is critical to accommodate the 4WD axle hub assembly; aftermarket wheels must have a hub bore equal to or larger than 108.1mm. Factory wheel offset is +22mm (16x5.5J). When upgrading off-road wheels, stay within ±10mm offset unless lifting the suspension. Secure with M12x1.25 conical (60-degree) seat lug nuts and re-torque to 85 ft-lbs after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Suzuki Jimny appears from 1998 to 2026 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 85 ft-lbs (115 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Suzuki Jimny — Frequently Asked Questions
What is the bolt pattern for a 2001 Suzuki Jimny?
The 2001 Suzuki Jimny uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.1mm and the offset is 22mm.
What other years of Suzuki Jimny have the same bolt pattern as the 2001?
The Suzuki Jimny uses the 5x139.7 pattern from 1998 through 2026. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What does 22mm offset mean for the 2001 Jimny?
An offset of 22mm means the wheel's mounting surface is 22mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
What is the center bore of a 2001 Suzuki Jimny?
The factory center bore (hub bore) for the 2001 Suzuki Jimny is 108.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2001 Suzuki Jimnys use lug bolts or lug nuts?
The 2001 Jimny requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2001 Suzuki Jimny?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset