2013 Suzuki Jimny Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2013 Suzuki Jimny is 5x139.7 (5x5.5"). It has a center bore of 108 mm, an offset range of 22, and utilizes 12x1.25 thread fasteners tightened to 85 ft-lbs (115 Nm).
2013 Suzuki Jimny Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108 mm |
| Offset (ET) | 22 |
| Torque Specs | 85 ft-lbs (115 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2013 Jimny — Year-Specific Fitment Context
The 2013 Suzuki Jimny is in year 16 of 29 using the 5x139.7 pattern (1998–2026). Wheels from any 1998–2026 Suzuki Jimny are cross-compatible with the 2013 model.
Suzuki Jimny Bolt Pattern by Year
The table below shows how the Jimny's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x139.7 | 108 | 22 |
| 1999 | 5x139.7 | 108 | 22 |
| 2000 | 5x139.7 | 108 | 22 |
| 2001 | 5x139.7 | 108 | 22 |
| 2002 | 5x139.7 | 108 | 22 |
| 2003 | 5x139.7 | 108 | 22 |
| 2004 | 5x139.7 | 108 | 22 |
| 2005 | 5x139.7 | 108 | 22 |
| 2006 | 5x139.7 | 108 | 22 |
| 2007 | 5x139.7 | 108 | 22 |
| 2008 | 5x139.7 | 108 | 22 |
| 2009 | 5x139.7 | 108 | 22 |
| 2010 | 5x139.7 | 108 | 22 |
| 2011 | 5x139.7 | 108 | 22 |
| 2012 | 5x139.7 | 108 | 22 |
| ▸ 2013 | 5x139.7 | 108 | 22 |
| 2014 | 5x139.7 | 108 | 22 |
| 2015 | 5x139.7 | 108 | 22 |
| 2016 | 5x139.7 | 108 | 22 |
| 2017 | 5x139.7 | 108 | 22 |
| 2018 | 5x139.7 | 108 | 22 |
| 2019 | 5x139.7 | 108 | 22 |
| 2020 | 5x139.7 | 108 | 22 |
| 2021 | 5x139.7 | 108 | 22 |
| 2022 | 5x139.7 | 108 | 22 |
| 2023 | 5x139.7 | 108 | 22 |
| 2024 | 5x139.7 | 108 | 22 |
| 2025 | 5x139.7 | 108 | 22 |
| 2026 | 5x139.7 | 108 | 22 |
5x139.7 Pattern Context & Compatible Vehicles
The 5x139.7 bolt pattern appears on 343 vehicles in our database (considered moderately common). Looking for interchangeable wheels or donor fitments? Check out other vehicles sharing the 5x139.7 pattern:
Expert Buying Guide for 2013 Suzuki Jimny
For the 2013 Suzuki Jimny (JB23 3rd generation), the 5x139.7 bolt pattern is shared across 1998-2017 models. The large 108.1mm center bore is critical to accommodate the 4WD axle hub assembly; aftermarket wheels must have a hub bore equal to or larger than 108.1mm. Factory wheel offset is +22mm (16x5.5J). When upgrading off-road wheels, stay within ±10mm offset unless lifting the suspension. Secure with M12x1.25 conical (60-degree) seat lug nuts and re-torque to 85 ft-lbs after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Suzuki Jimny appears from 1998 to 2026 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 85 ft-lbs (115 Nm), then re-check torque after 50-100 km (30-60 miles).
2013 Suzuki Jimny — Frequently Asked Questions
What is the bolt pattern for a 2013 Suzuki Jimny?
The 2013 Suzuki Jimny uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108mm and the offset is 22mm.
What other years of Suzuki Jimny have the same bolt pattern as the 2013?
The Suzuki Jimny uses the 5x139.7 pattern from 1998 through 2026. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Why is matching the 108mm center bore important for the 2013 Jimny?
The 108mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2013 Suzuki Jimny?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How tight should I torque the lug nuts on a 2013 Suzuki Jimny?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2013 Suzuki Jimny?
The factory center bore (hub bore) for the 2013 Suzuki Jimny is 108mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →