2011 Suzuki Jimny Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Suzuki Jimny, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108.1 mm |
| Offset (ET) | 22 |
| Torque Specs | 85 ft-lbs (115 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2011 Jimny — Year-Specific Fitment Context
The 2011 Suzuki Jimny is in year 14 of 29 using the 5x139.7 pattern (1998–2026). Wheels from any 1998–2026 Suzuki Jimny are cross-compatible with the 2011 model.
Suzuki Jimny Bolt Pattern by Year
The table below shows how the Jimny's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x139.7 | 108.1 | 22 |
| 1999 | 5x139.7 | 108.1 | 22 |
| 2000 | 5x139.7 | 108.1 | 22 |
| 2001 | 5x139.7 | 108.1 | 22 |
| 2002 | 5x139.7 | 108.1 | 22 |
| 2003 | 5x139.7 | 108.1 | 22 |
| 2004 | 5x139.7 | 108.1 | 22 |
| 2005 | 5x139.7 | 108.1 | 22 |
| 2006 | 5x139.7 | 108.1 | 22 |
| 2007 | 5x139.7 | 108.1 | 22 |
| 2008 | 5x139.7 | 108.1 | 22 |
| 2009 | 5x139.7 | 108.1 | 22 |
| 2010 | 5x139.7 | 108.1 | 22 |
| ▸ 2011 | 5x139.7 | 108.1 | 22 |
| 2012 | 5x139.7 | 108.1 | 22 |
| 2013 | 5x139.7 | 108.1 | 22 |
| 2014 | 5x139.7 | 108.1 | 22 |
| 2015 | 5x139.7 | 108.1 | 22 |
| 2016 | 5x139.7 | 108.1 | 22 |
| 2017 | 5x139.7 | 108.1 | 22 |
| 2018 | 5x139.7 | 108.1 | 22 |
| 2019 | 5x139.7 | 108.1 | 22 |
| 2020 | 5x139.7 | 108.1 | 22 |
| 2021 | 5x139.7 | 108.1 | 22 |
| 2022 | 5x139.7 | 108.1 | 22 |
| 2023 | 5x139.7 | 108.1 | 22 |
| 2024 | 5x139.7 | 108.1 | 22 |
| 2025 | 5x139.7 | 108.1 | 22 |
| 2026 | 5x139.7 | 108.1 | 22 |
5x139.7 Pattern Context
This bolt pattern appears on 319 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2011 Suzuki Jimny
For the 2011 Suzuki Jimny (JB23 3rd generation), the 5x139.7 bolt pattern is shared across 1998-2017 models. The large 108.1mm center bore is critical to accommodate the 4WD axle hub assembly; aftermarket wheels must have a hub bore equal to or larger than 108.1mm. Factory wheel offset is +22mm (16x5.5J). When upgrading off-road wheels, stay within ±10mm offset unless lifting the suspension. Secure with M12x1.25 conical (60-degree) seat lug nuts and re-torque to 85 ft-lbs after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Suzuki Jimny appears from 1998 to 2026 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 85 ft-lbs (115 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Suzuki Jimny — Frequently Asked Questions
What is the bolt pattern for a 2011 Suzuki Jimny?
The 2011 Suzuki Jimny uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.1mm and the offset is 22mm.
What other years of Suzuki Jimny have the same bolt pattern as the 2011?
The Suzuki Jimny uses the 5x139.7 pattern from 1998 through 2026. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 Suzuki Jimny?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Suzuki fit my 2011 Jimny?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 108.1mm.
How do I measure the bolt pattern on my 2011 Suzuki?
The 2011 Jimny uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2011 Suzuki Jimny?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset