2024 Toyota Camry Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Camry, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 Camry — Year-Specific Fitment Context
The 2024 Toyota Camry is in year 32 of 33 using the 5x114.3 pattern (1993–2025). Wheels from any 1993–2025 Toyota Camry are cross-compatible with the 2024 model. Across its full production run (1992–2025), the Camry has also used: 5x100.
Toyota Camry Bolt Pattern by Year
The table below shows how the Camry's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 54.1 | 40 |
| 1993 | 5x114.3 | 60.1 | 46 |
| 1994 | 5x114.3 | 60.1 | 46 |
| 1995 | 5x114.3 | 60.1 | 46 |
| 1996 | 5x114.3 | 60.1 | 46 |
| 1997 | 5x114.3 | 60.1 | 46 |
| 1998 | 5x114.3 | 60.1 | 46 |
| 1999 | 5x114.3 | 60.1 | 46 |
| 2000 | 5x114.3 | 60.1 | 46 |
| 2001 | 5x114.3 | 60.1 | 46 |
| 2002 | 5x114.3 | 60.1 | 46 |
| 2003 | 5x114.3 | 60.1 | 46 |
| 2004 | 5x114.3 | 60.1 | 46 |
| 2005 | 5x114.3 | 60.1 | 46 |
| 2006 | 5x114.3 | 60.1 | 46 |
| 2007 | 5x114.3 | 60.1 | 46 |
| 2008 | 5x114.3 | 60.1 | 46 |
| 2009 | 5x114.3 | 60.1 | 46 |
| 2010 | 5x114.3 | 60.1 | 46 |
| 2011 | 5x114.3 | 60.1 | 46 |
| 2012 | 5x114.3 | 60.1 | 46 |
| 2013 | 5x114.3 | 60.1 | 46 |
| 2014 | 5x114.3 | 60.1 | 46 |
| 2015 | 5x114.3 | 60.1 | 46 |
| 2016 | 5x114.3 | 60.1 | 46 |
| 2017 | 5x114.3 | 60.1 | 46 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2024 | 5x114.3 | 60.1 | 35-45 |
| 2025 | 5x114.3 | 60.1 | 35-45 |
Fitment Notes
The 2024 Toyota Camry has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Camry appears from 1992 to 2025 (34 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2024 Toyota Camry — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Camry?
The 2024 Toyota Camry uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Camry have the same bolt pattern as the 2024?
The Toyota Camry uses the 5x114.3 pattern from 1993 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the center bore of a 2024 Toyota Camry?
The factory center bore (hub bore) for the 2024 Toyota Camry is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2024 Toyota Camry?
The OEM offset for the 2024 Camry is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2024 Toyota Camry?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2024 Toyota Camry?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Camry, the PCD is 5x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota Camry has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2025 (34 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 91.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Toyota Camry, please report it via our About page contact so we can verify and update this record.