2006 Toyota Camry Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Camry, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Camry — Year-Specific Fitment Context
The 2006 Toyota Camry is in year 14 of 33 using the 5x114.3 pattern (1993–2025). Wheels from any 1993–2025 Toyota Camry are cross-compatible with the 2006 model. Across its full production run (1992–2025), the Camry has also used: 5x100.
Toyota Camry Bolt Pattern by Year
The table below shows how the Camry's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 54.1 | 40 |
| 1993 | 5x114.3 | 60.1 | 46 |
| 1994 | 5x114.3 | 60.1 | 46 |
| 1995 | 5x114.3 | 60.1 | 46 |
| 1996 | 5x114.3 | 60.1 | 46 |
| 1997 | 5x114.3 | 60.1 | 46 |
| 1998 | 5x114.3 | 60.1 | 46 |
| 1999 | 5x114.3 | 60.1 | 46 |
| 2000 | 5x114.3 | 60.1 | 46 |
| 2001 | 5x114.3 | 60.1 | 46 |
| 2002 | 5x114.3 | 60.1 | 46 |
| 2003 | 5x114.3 | 60.1 | 46 |
| 2004 | 5x114.3 | 60.1 | 46 |
| 2005 | 5x114.3 | 60.1 | 46 |
| ▸ 2006 | 5x114.3 | 60.1 | 46 |
| 2007 | 5x114.3 | 60.1 | 46 |
| 2008 | 5x114.3 | 60.1 | 46 |
| 2009 | 5x114.3 | 60.1 | 46 |
| 2010 | 5x114.3 | 60.1 | 46 |
| 2011 | 5x114.3 | 60.1 | 46 |
| 2012 | 5x114.3 | 60.1 | 46 |
| 2013 | 5x114.3 | 60.1 | 46 |
| 2014 | 5x114.3 | 60.1 | 46 |
| 2015 | 5x114.3 | 60.1 | 46 |
| 2016 | 5x114.3 | 60.1 | 46 |
| 2017 | 5x114.3 | 60.1 | 46 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
| 2025 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Toyota Camry
When selecting aftermarket wheels for your 2006 Toyota Camry, the 60.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the 2006 Camry uses M12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat or wrong thread) can lead to wheel detachment. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Camry appears from 1992 to 2025 (34 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 60.1mm to avoid vibrations.
- ✅ Stick to offsets between 40mm and 50mm for optimal clearance; lower offsets may require fender rolling.
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of initial installation to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Toyota Camry — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Camry?
The 2006 Toyota Camry uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 46mm.
What other years of Toyota Camry have the same bolt pattern as the 2006?
The Toyota Camry uses the 5x114.3 pattern from 1993 through 2025. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Can I use spacers on my 2006 Toyota Camry?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How do I measure the bolt pattern on my 2006 Toyota?
The 2006 Camry uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2006 Toyota Camry?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2006 Toyota Camry?
The factory center bore (hub bore) for the 2006 Toyota Camry is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset